P1E48 Buick Code - 14 Volt Power Module Temperature Sensor 2 High Temperature Sensing Circuit
Quick Answer
The 14 V power module, also called the accessory DC power control module, constantly monitors system temperature to protect against overheat conditions. Common causes include Program 14 V Power Module, Faulty 14 V Power Module, 14 V Power Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1E48 Buick indicates 14 Volt Power Module Temperature Sensor 2 High Temperature Sensing Circuit .
- Common causes
- Common causes include Program 14 V Power Module, Faulty 14 V Power Module, 14 V Power Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1E48 Buick Description
The 14 V power module is an air cooled component. The 14 V power module vent fan is controlled by the hybrid powertrain control module 2.
What are the Possible Causes of the DTC P1E48 Buick?
- Program 14 V Power Module
- Faulty 14 V Power Module
- 14 V Power Module harness is open or shorted
- 14 V Power Module circuit poor electrical connection
How to Fix the DTC P1E48 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1E48 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1E48 Buick code?
Need more information on how to fix the P1E48 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1E48 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1E48 Buick Code
What does the OBDII code P1E48 mean on a Buick?
The P1E48 code indicates an issue with the 14 Volt Power Module Temperature Sensor 2, specifically a high temperature sensing circuit fault.
What are the common symptoms of P1E48 on a Buick?
Common symptoms include the check engine light turning on, reduced charging system performance, or possible overheating of the 14-volt power module.
What causes the P1E48 code to appear?
Causes may include a faulty temperature sensor, wiring issues such as corrosion or short circuits, or a malfunctioning 14-volt power module.
Can I drive my Buick with the P1E48 code active?
It is not recommended to drive with this code active, as it could lead to charging system failure or overheating, potentially causing further damage.
How is the P1E48 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the temperature sensor, check the wiring and connections, and test the 14-volt power module for proper operation.
What repairs are needed to fix the P1E48 code?
Repairs may include replacing the temperature sensor, repairing or replacing damaged wiring, or replacing the 14-volt power module if it is malfunctioning.
How much does it cost to repair the P1E48 code on a Buick?
The cost depends on the specific issue, but replacing the temperature sensor or repairing wiring typically costs less than replacing the 14-volt power module, which can be more expensive.
Is the P1E48 code a common issue on Buick vehicles?
While not extremely common, it can occur in models with a 14-volt power module, especially if the vehicle has high mileage or has been exposed to harsh conditions.
Can a failing battery cause the P1E48 code?
A failing battery itself is unlikely to cause this specific code but may contribute to electrical issues that affect the power module or sensor circuit.
How can I prevent the P1E48 code from occurring in the future?
Regular maintenance, including inspecting the charging system and keeping electrical connections clean and secure, can help prevent this code.
Discuss the causes and fixes for P1E48 Buick OBDII Code
Code P1E48 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
