AutoCodes – Acura – P1E2C Acura

P1E2C Acura Code - Brake Fluid Pressure Sensor PL Circuit High Voltage

Quick Answer

The Engine Control Module (ECM) monitors the Brake Fluid Pressure Sensor PL. Common causes include Faulty Brake Fluid Pressure Sensor PL, Brake Fluid Pressure Sensor PL harness is open or shorted, Brake Fluid Pressure Sensor PL circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1E2C Acura indicates Brake Fluid Pressure Sensor PL Circuit High Voltage.
Common causes
Common causes include Faulty Brake Fluid Pressure Sensor PL, Brake Fluid Pressure Sensor PL harness is open or shorted, Brake Fluid Pressure Sensor PL circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 836
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 23, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1E2C Acura Description

The Engine Control Module (ECM) monitors the Brake Fluid Pressure Sensor PL. The ECM sets the OBDII code when the Brake Fluid Pressure Sensor PL is not to factory specifications.
OBDII Code P1E2C Acura - Brake Fluid Pressure Sensor PL Circuit High Voltage - AutoCodes.com
P1E2C Acura Code - Brake Fluid Pressure Sensor PL Circuit High Voltage

What are the Possible Causes of the DTC P1E2C Acura?

  • Faulty Brake Fluid Pressure Sensor PL
  • Brake Fluid Pressure Sensor PL harness is open or shorted
  • Brake Fluid Pressure Sensor PL circuit poor electrical connection

How to Fix the DTC P1E2C Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1E2C Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1E2C Acura code?

Need more information on how to fix the P1E2C Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1E2C Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1E2C Acura Code

What does the OBDII code P1E2C mean on an Acura?

The P1E2C code indicates a "Brake Fluid Pressure Sensor PL Circuit High Voltage" issue, meaning the sensor is detecting an abnormally high voltage in the brake fluid pressure circuit.

What are the symptoms of code P1E2C on an Acura?

Common symptoms include the ABS or brake warning light illuminating, reduced braking performance, or erratic braking behavior.

What causes the P1E2C code to appear?

The code can be caused by a faulty brake fluid pressure sensor, damaged wiring or connectors, or an issue with the ABS module.

Can I drive my Acura with a P1E2C code?

It is not recommended, as the issue may affect braking performance and safety. Have the vehicle inspected and repaired as soon as possible.

How do I diagnose the P1E2C code on my Acura?

Start by checking the brake fluid pressure sensor, inspecting the wiring and connectors for damage, and scanning for additional ABS-related codes.

What tools are needed to fix the P1E2C code?

A diagnostic scan tool, multimeter, and basic automotive tools are typically required to test the sensor, wiring, and ABS module.

How is the P1E2C code fixed on an Acura?

Repairs may involve replacing the brake fluid pressure sensor, repairing damaged wiring or connectors, or reprogramming or replacing the ABS module.

What is the cost of repairing the P1E2C code?

The cost varies but typically ranges from $100 to $500, depending on whether the sensor, wiring, or ABS module requires replacement.

Can low brake fluid trigger the P1E2C code?

No, low brake fluid typically triggers a different warning. The P1E2C code is specific to electrical issues in the brake fluid pressure sensor circuit.

Will clearing the P1E2C code solve the problem?

Clearing the code may turn off the warning light temporarily, but the underlying issue must be repaired to prevent the code from returning.

Discuss the causes and fixes for P1E2C Acura OBDII Code

Code P1E2C Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play