P1E12 Dodge Code - Temperature Door Position Signal Short To Ground
Quick Answer
The Powertrain Control Module receives a CAN BUS message from the Heating, Ventilation, and Air Conditioning (HVAC) module that a Temperature Door Actuator position signal circuit is shorted to ground. Common causes include Faulty Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator, Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator harness is open or shorted, Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1E12 Dodge indicates Temperature Door Position Signal Short To Ground.
- Common causes
- Common causes include Faulty Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator, Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator harness is open or shorted, Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1E12 Dodge Description
What are the Possible Causes of the DTC P1E12 Dodge?
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator
- Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator harness is open or shorted
- Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator circuit poor electrical connection
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Controller
How to Fix the DTC P1E12 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1E12 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1E12 Dodge code?
Need more information on how to fix the P1E12 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1E12 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1E12 Dodge Code
1. What does the OBDII code P1E12 mean on a Dodge vehicle?
P1E12 indicates a "Temperature Door Position Signal Short To Ground," meaning there's an electrical issue with the temperature door control circuit.
2. What are the common symptoms of the P1E12 code?
Symptoms include inconsistent cabin temperature, failure to adjust temperature settings, or the HVAC system being stuck on hot or cold.
3. What causes the P1E12 code to appear?
The code is typically caused by a short-to-ground in the temperature door position signal wiring, a faulty blend door actuator, or a damaged HVAC control module.
4. Can I drive my Dodge with the P1E12 code active?
Yes, but the HVAC system may not function properly, leading to discomfort in extreme weather conditions.
5. How do I diagnose the P1E12 code?
Use a scan tool to confirm the code, inspect the temperature door actuator wiring for damage or shorts, and test the actuator for proper function.
6. What is the blend door actuator, and how is it related to the P1E12 code?
The blend door actuator controls the movement of the temperature door, regulating cabin temperature. A malfunctioning actuator can trigger the P1E12 code.
7. How do I fix the P1E12 code on my Dodge?
Repairs may include repairing or replacing damaged wiring, replacing the blend door actuator, or, in rare cases, replacing the HVAC control module.
8. Is it expensive to fix a P1E12 code?
The cost depends on the issue. Replacing a blend door actuator typically costs between $150 and $300, while wiring repairs may vary.
9. How can I prevent the P1E12 code from occurring?
Regularly inspect your vehicle's wiring for wear or damage and ensure the HVAC system components are functioning properly.
10. Can a faulty HVAC control module cause the P1E12 code?
Yes, though less common, a malfunctioning HVAC control module can cause the code if it fails to properly communicate with the blend door actuator.
Discuss the causes and fixes for P1E12 Dodge OBDII Code
Code P1E12 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
