P1E0C Chrysler Code - Empty Fuel Tank
Quick Answer
The Powertrain Control Module (PCM) monitors the Fuel Level Sensor. Common causes include Faulty Fuel Level Sensor, Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1E0C Chrysler indicates Empty Fuel Tank.
- Common causes
- Common causes include Faulty Fuel Level Sensor, Faulty Powertrain Control Module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1E0C Chrysler Description
What are the Possible Causes of the DTC P1E0C Chrysler?
- Faulty Fuel Level Sensor
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1E0C Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1E0C Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1E0C Chrysler code?
Need more information on how to fix the P1E0C Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1E0C Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1E0C Chrysler Code
1. What does the OBDII code P1E0C mean on a Chrysler vehicle?
The P1E0C code indicates "Empty Fuel Tank," meaning the vehicle's control module has detected a low or empty fuel tank condition.
2. What are the common symptoms of the P1E0C code?
Common symptoms include the fuel gauge reading empty, the engine stalling, difficulty starting the vehicle, or reduced engine performance.
3. What causes the P1E0C code to appear?
This code can be triggered by an actual empty fuel tank, a faulty fuel level sensor, wiring issues, or problems with the vehicle's fuel pump module.
4. Can driving with the P1E0C code damage my Chrysler?
Yes, driving with this code could lead to fuel pump damage if the fuel tank is empty, as the pump relies on fuel for cooling and lubrication.
5. How do I diagnose the P1E0C code in my Chrysler?
Start by checking the fuel tank level, inspecting the fuel level sensor, and testing the wiring and connections to the fuel pump module.
6. Can the P1E0C code appear even if my fuel tank isn’t empty?
Yes, a malfunctioning fuel level sensor or wiring issue can cause the code to appear even if the tank has fuel.
7. How do I fix the P1E0C code on a Chrysler?
Refill the fuel tank if it’s empty, inspect and replace the fuel level sensor if faulty, or repair damaged wiring to the fuel pump module.
8. How much does it cost to fix the P1E0C code?
The cost depends on the issue. Refilling the tank is inexpensive, but replacing a fuel level sensor or repairing wiring could cost $200-$500, depending on labor rates and parts.
9. Can a faulty fuel pump trigger the P1E0C code?
Yes, a malfunctioning fuel pump or its module can send incorrect fuel level data to the control module, triggering the code.
10. Will clearing the P1E0C code with a scan tool solve the problem?
Clearing the code may temporarily turn off the warning light, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for P1E0C Chrysler OBDII Code
Code P1E0C Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
