P1E00 2014 GMC Sierra Code - Hybrid Powertrain Control Module 2 Requested MIL Illumination
Quick Answer
Control modules constantly monitor the vehicle for any condition which may adversely affect vehicle performance. Common causes include Check Hybrid Powertrain Control Module for codes, Faulty Hybrid Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1E00 2014 GMC Sierra indicates Hybrid Powertrain Control Module 2 Requested MIL Illumination.
- Common causes
- Common causes include Check Hybrid Powertrain Control Module for codes, Faulty Hybrid Powertrain Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1E00 2014 GMC Sierra Description
The DTC will be set when the ECM receives a serial data message from the Hybrid Powertrain Control Module indicating that DTC has been set in the module.
What are the Possible Causes of the DTC P1E00 2014 GMC Sierra?
- Check Hybrid Powertrain Control Module for codes
- Faulty Hybrid Powertrain Control Module
How to Fix the DTC P1E00 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1E00 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1E00 2014 GMC Sierra code?
Need more information on how to fix the P1E00 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1E00 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1E00 2014 GMC Sierra Code
1. What does the OBDII code P1E00 mean on a 2014 GMC Sierra?
P1E00 indicates that the Hybrid Powertrain Control Module 2 has requested the Malfunction Indicator Light (MIL) to illuminate due to a detected issue in the hybrid control system.
2. What are the common symptoms of code P1E00 on a 2014 GMC Sierra?
Symptoms may include the check engine light turning on, reduced hybrid system performance, decreased fuel efficiency, or unusual vehicle operation.
3. What causes the P1E00 code on a 2014 GMC Sierra?
Common causes include software issues in the Hybrid Powertrain Control Module, faulty wiring or connectors, or a malfunction in a hybrid system sensor or component.
4. Can I drive my 2014 GMC Sierra with the P1E00 code?
While it might be possible to drive, it is not recommended to ignore the code, as it could lead to further damage or reduced vehicle performance.
5. How is the P1E00 code diagnosed on a 2014 GMC Sierra?
A technician will use a scan tool to retrieve related codes, inspect wiring and connectors, and perform specific tests on hybrid system components.
6. How can I fix the P1E00 code on my 2014 GMC Sierra?
Repairs may include updating the hybrid system software, repairing damaged wiring, or replacing faulty components such as sensors or control modules.
7. Is the P1E00 code specific to hybrid vehicles?
Yes, this code is specific to vehicles equipped with hybrid powertrain systems, as it involves the Hybrid Powertrain Control Module.
8. What is the Hybrid Powertrain Control Module 2?
It is a control unit responsible for managing certain aspects of the hybrid system, including battery management and electric motor operation.
9. Will clearing the P1E00 code fix the problem?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.
10. How much does it cost to repair the P1E00 code on a 2014 GMC Sierra?
Repair costs can vary widely depending on the root cause, ranging from $100 for minor wiring repairs to over $1,000 for control module replacement.
Discuss the causes and fixes for P1E00 2014 GMC Sierra OBDII Code
Code P1E00 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
