P1DDE Chrysler Code - Ignition Run-Start Input 1-2 Correlation
Quick Answer
The purpose of the diagnostic is to monitor if the hard-wired ignition signal state is equal to the ignition signal state received on the Controller Area Network (CAN) BUS. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted, Transmission Control Module (TCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1DDE Chrysler indicates Ignition Run-Start Input 1-2 Correlation.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module (TCM) harness is open or shorted, Transmission Control Module (TCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1DDE Chrysler Description
What are the Possible Causes of the DTC P1DDE Chrysler?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module (TCM) harness is open or shorted
- Transmission Control Module (TCM) circuit poor electrical connection
How to Fix the DTC P1DDE Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1DDE Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1DDE Chrysler code?
Need more information on how to fix the P1DDE Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1DDE Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1DDE Chrysler Code
1. What does the OBDII code P1DDE mean on a Chrysler vehicle?
The P1DDE code indicates an "Ignition Run-Start Input 1-2 Correlation" issue, meaning the signals from the ignition switch are not aligning as expected.
2. What are the symptoms of the P1DDE code in a Chrysler?
Common symptoms include difficulty starting the vehicle, intermittent stalling, or the engine not cranking at all.
3. What causes the P1DDE code to appear on a Chrysler vehicle?
Possible causes include a faulty ignition switch, damaged wiring, poor electrical connections, or an issue with the Powertrain Control Module (PCM).
4. Can a weak battery trigger the P1DDE code?
Yes, a weak or failing battery can cause voltage irregularities that might trigger this code.
5. How is the P1DDE code diagnosed?
Technicians will use a scan tool to verify the code, inspect the ignition switch, check wiring and connectors, and test the voltage and ground circuits.
6. Can I drive my Chrysler with the P1DDE code active?
Driving may be possible, but it’s not recommended as the vehicle could stall unexpectedly, leading to unsafe conditions.
7. How do I fix the P1DDE code on a Chrysler?
Repairs may involve replacing the ignition switch, repairing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the PCM if necessary.
8. How much does it cost to fix the P1DDE code on a Chrysler?
Repair costs can vary but typically range from $150 to $500 depending on whether the issue is with the ignition switch, wiring, or PCM.
9. Can I clear the P1DDE code without fixing the problem?
While you can clear the code with a scan tool, the underlying issue will likely cause it to reappear until properly repaired.
10. Is the P1DDE code related to other ignition system issues?
Yes, it can be associated with other faults in the ignition system or wiring, so a thorough inspection is recommended.
Discuss the causes and fixes for P1DDE Chrysler OBDII Code
Code P1DDE Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
