AutoCodes – Jeep – P1DA4 Jeep

P1DA4 Jeep Code - Incorrect Gear Ratio Clutch 'B' 'C' Or 'D' Defective

Quick Answer

The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. Common causes include Faulty Transmission Internal Components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1DA4 Jeep indicates Incorrect Gear Ratio Clutch 'B' 'C' Or 'D' Defective .
Common causes: Common causes include Faulty Transmission Internal Components.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,159

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 21, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1DA4 Jeep Description

The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. slipping clutches, hydraulic or mechanical defects, etc.). The TCM compares the actual gear ratio (i.e. the ratio of input speed to output speed) to a minimum and maximum calibrated gear ratio value. The TCM performs this comparison while driving in a fixed gear, during gear engagement, and during shifting from one gear to another.

OBDII Code P1DA4 Jeep - Incorrect Gear Ratio Clutch 'B' 'C' Or 'D' Defective - AutoCodes.com — P1DA4 Jeep Code - Incorrect Gear Ratio Clutch 'B' 'C' Or 'D' Defective

What does this mean?

What are the Possible Causes of the DTC P1DA4 Jeep?

Faulty Transmission Internal Components

How to Fix the DTC P1DA4 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1DA4 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1DA4 Jeep code?

Need more information on how to fix the P1DA4 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1DA4 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1DA4 Jeep Code

What does the OBDII code P1DA4 mean for a Jeep?

P1DA4 indicates an "Incorrect Gear Ratio" related to Clutch 'B,' 'C,' or 'D,' typically signaling an issue with the transmission system's operation.

What are the common symptoms of code P1DA4 in a Jeep?

Symptoms include difficulty shifting gears, slipping gears, unusual noises from the transmission, reduced fuel efficiency, and the illumination of the check engine light.

What causes the P1DA4 code to appear in a Jeep?

Common causes include a faulty transmission control module (TCM), worn or damaged clutches, malfunctioning sensors (like the input or output speed sensor), or low or contaminated transmission fluid.

Can driving with the P1DA4 code damage my Jeep?

Yes, continuing to drive with this code can cause further transmission damage, leading to more expensive repairs if not addressed promptly.

How is the P1DA4 code diagnosed?

A mechanic typically uses a scan tool to confirm the code, inspects the transmission fluid, checks the operation of related sensors, and performs manual tests on the clutches if necessary.

Is low transmission fluid a possible reason for the P1DA4 code?

Yes, low or contaminated transmission fluid can cause improper clutch engagement, leading to the incorrect gear ratio error.

What repairs are typically needed to fix the P1DA4 code?

Repairs may include replacing damaged clutches, repairing or replacing the TCM, replacing faulty sensors, or performing a transmission fluid flush and refill.

Can a faulty speed sensor trigger the P1DA4 code?

Yes, a malfunctioning input or output speed sensor can cause incorrect gear ratio readings, resulting in the P1DA4 code.

How much does it cost to repair the P1DA4 code on a Jeep?

Repair costs can vary widely depending on the issue, ranging from $100 for a sensor replacement to over $1,000 for more extensive transmission repairs.

Can updating the transmission control module software fix the P1DA4 code?

In some cases, a software update for the TCM may resolve the issue, particularly if the code is caused by a software glitch.