AutoCodes – Chrysler – P1D96 Chrysler

P1D96 Chrysler Code - Incorrect Gear Ratio Clutch 'A' Or 'B' Defective

Quick Answer

The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. Common causes include Faulty Transmission Internal Components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1D96 Chrysler indicates Incorrect Gear Ratio Clutch 'A' Or 'B' Defective.
Common causes: Common causes include Faulty Transmission Internal Components.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,008

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 19, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1D96 Chrysler Description

The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. slipping clutches, hydraulic or mechanical defects, etc.). The TCM compares the actual gear ratio (i.e. the ratio of input speed to output speed) to a minimum and maximum calibrated gear ratio value. The TCM performs this comparison while driving in a fix gear, during gear engagement, and during shifting from one gear to another.

OBDII Code P1D96 Chrysler - Incorrect Gear Ratio Clutch 'A' Or 'B' Defective - AutoCodes.com — P1D96 Chrysler Code - Incorrect Gear Ratio Clutch 'A' Or 'B' Defective

What does this mean?

What are the Possible Causes of the DTC P1D96 Chrysler?

Faulty Transmission Internal Components

How to Fix the DTC P1D96 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1D96 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1D96 Chrysler code?

Need more information on how to fix the P1D96 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1D96 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1D96 Chrysler Code

1. What does the OBDII code P1D96 mean on a Chrysler?

The P1D96 code indicates an "Incorrect Gear Ratio Clutch 'A' Or 'B' Defective," meaning the transmission control module has detected an issue with the gear ratio related to clutch A or B.

2. What are the common symptoms of the P1D96 code?

Symptoms may include poor acceleration, erratic shifting, transmission slipping, reduced fuel efficiency, or the vehicle going into limp mode.

3. What causes the P1D96 code to appear?

Common causes include worn or damaged clutch components, low or contaminated transmission fluid, faulty sensors (e.g., input/output speed sensors), or internal transmission issues.

4. Can I drive my Chrysler with the P1D96 code active?

Itâ€™s not recommended to drive with this code active, as it may cause further damage to the transmission or lead to unsafe driving conditions.

5. How do I diagnose the P1D96 code?

Diagnosis may involve checking the transmission fluid level and condition, inspecting wiring and connectors, testing input/output speed sensors, and performing a transmission pressure test.

6. Can low transmission fluid cause the P1D96 code?

Yes, low or contaminated transmission fluid can lead to clutch slippage and incorrect gear ratios, triggering the P1D96 code.

7. How do I fix the P1D96 code on my Chrysler?

Repairs may include replacing damaged clutch components, fixing faulty sensors, flushing and refilling the transmission fluid, or rebuilding the transmission if needed.

8. Is the P1D96 code specific to Chrysler vehicles?

Yes, the P1D96 code is a manufacturer-specific code for Chrysler vehicles, indicating a specific issue with clutch A or B in the transmission.

9. How much does it cost to repair the P1D96 code?

Repair costs vary widely depending on the root cause; minor fixes like fluid changes may cost under $200, while major transmission repairs or replacements can exceed $2,000.

10. Can a software update resolve the P1D96 code?

In some cases, a software update for the transmission control module may fix the issue, but this depends on the specific circumstances and should be confirmed through proper diagnostics.