P1D93 Dodge Code - Incorrect Gear Ratio Clutch 5 Defective
Quick Answer
The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. Common causes include Faulty Transmission Internal Components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1D93 Dodge indicates Incorrect Gear Ratio Clutch 5 Defective.
- Common causes
- Common causes include Faulty Transmission Internal Components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1D93 Dodge Description
What are the Possible Causes of the DTC P1D93 Dodge?
- Faulty Transmission Internal Components
How to Fix the DTC P1D93 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1D93 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1D93 Dodge code?
Need more information on how to fix the P1D93 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1D93 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1D93 Dodge Code
1. What does the OBDII code P1D93 mean on a Dodge vehicle?
P1D93 indicates an "Incorrect Gear Ratio Clutch 5 Defective," meaning the transmission's clutch 5 is not operating as expected, leading to a mismatch between engine speed and vehicle speed.
2. What are the common symptoms of the P1D93 code?
Symptoms include transmission slipping, harsh or delayed shifting, poor acceleration, decreased fuel efficiency, and the illumination of the check engine light.
3. What causes the P1D93 code to appear?
Common causes include low or contaminated transmission fluid, a faulty clutch 5 pressure switch, worn clutch components, or internal transmission damage.
4. Can driving with the P1D93 code damage my vehicle?
Yes, driving with this code can lead to further transmission damage or unsafe driving conditions due to gear shifting issues.
5. How can I fix the P1D93 code?
Repairs may involve replacing or repairing clutch 5 components, inspecting and topping off transmission fluid, replacing the clutch pressure switch, or rebuilding the transmission if internal damage is severe.
6. How is the P1D93 code diagnosed?
A technician will typically check the transmission fluid level and condition, inspect the clutch pressure switch, and run diagnostic tests to monitor transmission operation and identify the faulty component.
7. Can low transmission fluid cause the P1D93 code?
Yes, low or contaminated transmission fluid can lead to clutch slippage and incorrect gear ratios, triggering the P1D93 code.
8. Is the P1D93 code specific to Dodge vehicles?
While this code is common on Dodge vehicles, it may also occur on other manufacturers’ vehicles with similar transmission systems.
9. How much does it cost to fix the P1D93 code?
Repair costs vary widely depending on the issue, ranging from $100 for a fluid change to over $2,000 for a complete transmission rebuild.
10. Can I clear the P1D93 code without fixing the problem?
You can clear the code temporarily with a scan tool, but the issue will likely return if the underlying problem isn’t resolved.
Discuss the causes and fixes for P1D93 Dodge OBDII Code
Code P1D93 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
