P1D90 Dodge Code - Incorrect Gear Ratio Clutch 2 Defective
Quick Answer
The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. Common causes include Faulty Transmission Internal Components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1D90 Dodge indicates Incorrect Gear Ratio Clutch 2 Defective.
- Common causes
- Common causes include Faulty Transmission Internal Components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1D90 Dodge Description
What are the Possible Causes of the DTC P1D90 Dodge?
- Faulty Transmission Internal Components
How to Fix the DTC P1D90 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1D90 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1D90 Dodge code?
Need more information on how to fix the P1D90 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1D90 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1D90 Dodge Code
1. What does the OBDII code P1D90 mean on a Dodge vehicle?
P1D90 indicates "Incorrect Gear Ratio Clutch 2 Defective," meaning the transmission control module (TCM) has detected an issue with the Clutch 2 gear ratio in the transmission.
2. What are the symptoms of the P1D90 code in a Dodge?
Symptoms may include difficulty shifting gears, transmission slipping, poor acceleration, reduced fuel efficiency, or the vehicle going into limp mode.
3. What causes the P1D90 code to appear?
Common causes include a faulty transmission solenoid, damaged clutch components, low transmission fluid, or issues with the transmission control module.
4. Can driving with a P1D90 code damage my vehicle?
Yes, continuing to drive with this code can cause further damage to the transmission and other drivetrain components, potentially leading to costly repairs.
5. How is the P1D90 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect transmission fluid levels and condition, and test the transmission solenoids and clutch components for proper operation.
6. Can low transmission fluid cause the P1D90 code?
Yes, low or dirty transmission fluid can cause improper clutch engagement and lead to the P1D90 code.
7. What repairs might fix the P1D90 code?
Repairs may include replacing the transmission solenoid, repairing or replacing damaged clutch components, performing a transmission fluid flush, or reprogramming the TCM.
8. How much does it cost to fix a P1D90 code on a Dodge?
Repair costs vary depending on the issue, but they can range from $150 for a fluid change to over $2,000 for major transmission repairs.
9. Can a software update resolve the P1D90 code?
In some cases, a TCM software update from the manufacturer may resolve the issue if it is caused by incorrect programming.
10. Is it safe to clear the P1D90 code and keep driving?
Clearing the code without addressing the underlying issue is not recommended, as the problem will likely return and could lead to further damage.
Discuss the causes and fixes for P1D90 Dodge OBDII Code
Code P1D90 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
