P1D85 Acura Code - Traction Motor Inverter Module Malfunction Signal Line Low
Quick Answer
The motor control module receives the abnormality inside the Motor Power Inverter (MPI) Module detected by MPI module as an abnormality signal. Common causes include Faulty Motor Power Inverter (MPI) Module, Motor Power Inverter (MPI) Module harness is open or shorted, Motor Power Inverter (MPI) Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1D85 Acura indicates Traction Motor Inverter Module Malfunction Signal Line Low.
- Common causes
- Common causes include Faulty Motor Power Inverter (MPI) Module, Motor Power Inverter (MPI) Module harness is open or shorted, Motor Power Inverter (MPI) Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1D85 Acura Description
What are the Possible Causes of the DTC P1D85 Acura?
- Faulty Motor Power Inverter (MPI) Module
- Motor Power Inverter (MPI) Module harness is open or shorted
- Motor Power Inverter (MPI) Module circuit poor electrical connection
- Faulty Motor Control Module
How to Fix the DTC P1D85 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1D85 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1D85 Acura code?
Need more information on how to fix the P1D85 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1D85 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1D85 Acura Code
1. What does the OBDII code P1D85 mean on an Acura?
Code P1D85 indicates a "Traction Motor Inverter Module Malfunction Signal Line Low," which suggests a communication issue or malfunction in the traction motor inverter module.
2. What are the common symptoms of the P1D85 code?
Common symptoms include reduced vehicle performance, illuminated check engine light, hybrid system warnings, or difficulty in using electric drive modes.
3. What causes the P1D85 code to appear?
Possible causes include a faulty traction motor inverter module, damaged wiring or connectors, a short to ground, or a communication fault between the module and the ECU.
4. Can I drive my Acura with the P1D85 code?
Driving with this code is not recommended as it may lead to reduced performance or potential damage to the hybrid or traction motor system.
5. How is the P1D85 code diagnosed?
A technician will use a scan tool to verify the code, inspect wiring and connectors for damage, and test the traction motor inverter module for proper function.
6. How do you fix the P1D85 code on an Acura?
Repairs may include replacing the traction motor inverter module, repairing or replacing damaged wiring, or reprogramming the ECU if necessary.
7. How much does it cost to repair the P1D85 code?
Repair costs vary but may range from $500 to $2,000 depending on whether the inverter module needs replacement or if minor wiring repairs are sufficient.
8. Can a weak 12V battery cause the P1D85 code?
A weak or failing 12V battery can sometimes contribute to communication errors, but it’s not a common cause of this specific code.
9. Is the P1D85 code related to the hybrid battery?
While it’s not directly related to the hybrid battery, issues with the traction motor inverter module can impact the hybrid system’s overall functionality.
10. Do I need to reset the ECU after fixing the P1D85 code?
Yes, after completing the repairs, the ECU should be reset to clear the code and verify that the issue has been resolved.
Discuss the causes and fixes for P1D85 Acura OBDII Code
Code P1D85 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
