AutoCodes – Honda – P1D62 Honda

P1D62 Honda Code - Leak Sensor Drive Inhibition Signal Stuck On

Quick Answer

There is a high voltage wiring system, including the high voltage battery, in the electric powertrain. Common causes include Faulty Leak Sensor Drive Inhibition, Leak Sensor Drive Inhibition harness is open or shorted, Leak Sensor Drive Inhibition circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1D62 Honda indicates Leak Sensor Drive Inhibition Signal Stuck On.
Common causes: Common causes include Faulty Leak Sensor Drive Inhibition, Leak Sensor Drive Inhibition harness is open or shorted, Leak Sensor Drive Inhibition circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 854

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1D62 Honda Description

There is a high voltage wiring system, including the high voltage battery, in the electric powertrain. The high voltage wiring system is insulated from the body on both positive and negative circuits. The leak sensor stops measuring the short circuit resistance when it receives prohibit drive signal from the battery condition monitor module, and sends it signal via the serial communication to the battery condition monitor module. When the battery condition monitor module sends a to drive signal (drive inhibition signal line: high), the leak sensor sends drive stop signal for a set time, the battery condition monitor module detects a malfunction and stores a DTC.

OBDII Code P1D62 Honda - Leak Sensor Drive Inhibition Signal Stuck On - AutoCodes.com — P1D62 Honda Code - Leak Sensor Drive Inhibition Signal Stuck On

What does this mean?

What are the Possible Causes of the DTC P1D62 Honda?

Faulty Leak Sensor Drive Inhibition
Leak Sensor Drive Inhibition harness is open or shorted
Leak Sensor Drive Inhibition circuit poor electrical connection

How to Fix the DTC P1D62 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1D62 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1D62 Honda code?

Need more information on how to fix the P1D62 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1D62 Honda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1D62 Honda Code

1. What are common symptoms of OBDII code P1D62 in a Honda?

Common symptoms include the check engine light illuminating, decreased fuel efficiency, and potential issues with the vehicle's emissions system.

2. What does the OBDII code P1D62 "Leak Sensor Drive Inhibition Signal Stuck On" mean in a Honda?

This code indicates that there is a malfunction in the leak sensor drive inhibition signal, which is part of the vehicle's evaporative emission control system.

3. What are possible causes of OBDII code P1D62 in a Honda?

Possible causes include a faulty leak sensor, damaged wiring or connectors in the emission control system, or a problem with the Engine Control Module (ECM).

4. How can I diagnose OBDII code P1D62 in my Honda?

Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the emission control system components, checking wiring for damage, and testing the leak sensor.

5. Can I still drive my Honda with OBDII code P1D62?

It is generally not recommended to drive the vehicle with this code present, as it can lead to decreased fuel efficiency and potential issues with the emissions system.

6. How can I repair OBDII code P1D62 in my Honda?

Repair options may include replacing the leak sensor, repairing damaged wiring or connectors, or resetting the ECM after fixing the issue causing the code.

7. Are there any DIY tips for addressing OBDII code P1D62 in a Honda?

While some basic inspections and checks can be done by DIY enthusiasts, it is recommended to consult a professional mechanic for proper diagnosis and repair of this code.

8. Will OBDII code P1D62 cause my Honda to fail an emissions test?

Yes, having this code present can cause your Honda to fail an emissions test, as it indicates a malfunction in the vehicle's evaporative emission control system.

9. How much does it typically cost to repair OBDII code P1D62 in a Honda?

The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $500 or more, including parts and labor.

10. Can resetting the check engine light resolve OBDII code P1D62 in a Honda?

Simply resetting the check engine light will not fix the underlying issue causing the code. It is important to diagnose and repair the problem to prevent it from reoccurring.