AutoCodes – Dodge – P1D30 Dodge

P1D30 Dodge Code - Oil Viscosity Too Low

Quick Answer

With the engine running, the Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module (PCM) has detected that the engine oil viscosity is too low. Common causes include Engine Oil Change Counter Level Too Low, Change engine oil and filter. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1D30 Dodge indicates Oil Viscosity Too Low.
Common causes: Common causes include Engine Oil Change Counter Level Too Low, Change engine oil and filter.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,032

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 30, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1D30 Dodge Description

With the engine running, the Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module (PCM) has detected that the engine oil viscosity is too low. Change engine oil and filter and reset the engine oil indicator.

OBDII Code P1D30 Dodge - Oil Viscosity Too Low - AutoCodes.com — P1D30 Dodge Code - Oil Viscosity Too Low

What does this mean?

What are the Possible Causes of the DTC P1D30 Dodge?

Engine Oil Change Counter Level Too Low
Change engine oil and filter

How to Fix the DTC P1D30 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1D30 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1D30 Dodge code?

Need more information on how to fix the P1D30 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1D30 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1D30 Dodge Code

1. What are the common symptoms of OBDII code P1D30 "Oil Viscosity Too Low" in a Dodge?

- Common symptoms include engine knocking or tapping noises, reduced engine performance, and potentially an illuminated check engine light.

2. What are the possible causes of OBDII code P1D30 in a Dodge indicating "Oil Viscosity Too Low"?

- Causes can include using the wrong type of oil for the Dodge's engine, improper oil viscosity, a malfunctioning oil pressure sensor, or contaminated oil.

3. How can I diagnose OBDII code P1D30 on my Dodge related to "Oil Viscosity Too Low"?

- A diagnostic scan tool can be used to read the code, check the oil level and viscosity, inspect the oil pressure sensor, and ensure the correct oil type is being used.

4. What steps should I take to repair OBDII code P1D30 "Oil Viscosity Too Low" in my Dodge?

- To repair this code, first, confirm the correct oil viscosity and type for your Dodge, then change the oil and oil filter if needed. Ensure the oil pressure sensor is functioning properly.

5. Can driving with OBDII code P1D30 "Oil Viscosity Too Low" in a Dodge cause serious engine damage?

- Continuing to drive with this code can potentially cause engine damage due to inadequate lubrication, so it is recommended to address the issue promptly.

6. Are there any preventative measures to avoid OBDII code P1D30 "Oil Viscosity Too Low" in a Dodge?

- Regularly check and maintain the correct oil level and viscosity, use the manufacturer-recommended oil type, and adhere to the recommended oil change intervals to prevent this issue.

7. Will resetting the check engine light resolve OBDII code P1D30 "Oil Viscosity Too Low" in a Dodge?

- Simply resetting the check engine light will not fix the underlying issue causing the code. It is important to diagnose and address the root cause of the problem.

8. Can a mechanic easily fix OBDII code P1D30 "Oil Viscosity Too Low" in a Dodge?

- A qualified mechanic should be able to diagnose and repair this code by verifying the oil type and viscosity, checking the oil pressure sensor, and performing any necessary oil changes.

9. Is it safe to drive my Dodge with OBDII code P1D30 "Oil Viscosity Too Low" if I don't notice any symptoms?

- While you may not notice immediate issues, it is not recommended to drive with this code as it can lead to engine damage over time. It is best to address the problem promptly.

10. How much does it typically cost to repair OBDII code P1D30 "Oil Viscosity Too Low" in a Dodge at a repair shop?

- The cost of repairing this code can vary depending on the root cause, but it may involve an oil change, oil pressure sensor replacement, or other related repairs, typically ranging from $100 to $500 or more.