P1D00 - All CAN Malfunction Battery Condition Monitor Module - PCM
- Faulty Battery Condition Monitor Module
- Battery Condition Monitor Module harness is open or shorted
- Battery Condition Monitor Module circuit poor electrical connection
- Engine Light ON (or Service Engine Soon Warning Light)
P1d00 DescriptionThe battery control processor is in the battery condition monitor module. The controller area network (CAN) transmits/receives pulsing signals to/from the control modules simultaneously by using two signal lines (F-CAN A_H and F-CAN A_L) and (EPP-CAN_H and EPP-CAN_L). The F-CAN and the EPP-CAN sends same data. If the F-CAN or the EPP-CAN does not transmit/receive data, the normal signal line can transmit/receive data. If the F-CAN and the EPP-CAN does not transmit/receive data, the battery condition monitor module cannot run normally. The battery condition monitor module detects no signal, received data is abnormal or BUS-OFF is received via the F-CAN and EPP-CAN, the battery condition monitor module detects a malfunction and stores a DTC.
P1D00 Information for specific makes
Need more help?Get the P1d00 code diagnosed by a professional: Find a repair shop in your area
P1D00 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1d00 code? Have you replaced any parts?
Any information is appreciated. Thanks