P1CCE Chrysler Code - Hydraulic Pump Driver Feedback Range-Performance
Quick Answer
This diagnostic checks for the range of the hydraulic pump driver feedback signal provided by the Smart Drive Unit (SDU) to the Transmission Control Module (TCM). Common causes include Faulty Smart Drive Unit (SDU), Smart Drive Unit (SDU) harness is open or shorted, Smart Drive Unit (SDU) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1CCE Chrysler indicates Hydraulic Pump Driver Feedback Range-Performance.
- Common causes
- Common causes include Faulty Smart Drive Unit (SDU), Smart Drive Unit (SDU) harness is open or shorted, Smart Drive Unit (SDU) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1CCE Chrysler Description
What are the Possible Causes of the DTC P1CCE Chrysler?
- Faulty Smart Drive Unit (SDU)
- Smart Drive Unit (SDU) harness is open or shorted
- Smart Drive Unit (SDU) circuit poor electrical connection
- Faulty Transmission Controller Module (TCM)
How to Fix the DTC P1CCE Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1CCE Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1CCE Chrysler code?
Need more information on how to fix the P1CCE Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1CCE Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1CCE Chrysler Code
1. What are the common symptoms of OBDII code P1CCE in a Chrysler related to the Hydraulic Pump Driver Feedback Range-Performance issue?
- Common symptoms include difficulty starting the vehicle, loss of power steering assistance, illuminated warning lights on the dashboard, and unusual noises coming from the power steering system.
2. What are the possible causes of OBDII code P1CCE in a Chrysler indicating an issue with the Hydraulic Pump Driver Feedback Range-Performance?
- The code may be triggered by a faulty hydraulic pump, damaged wiring or connectors in the power steering system, low power steering fluid levels, or a malfunctioning power steering control module.
3. How can I diagnose the OBDII code P1CCE related to the Hydraulic Pump Driver Feedback Range-Performance problem in my Chrysler?
- A thorough diagnosis typically involves checking the power steering fluid level, inspecting the power steering system for leaks or damage, testing the hydraulic pump operation, and using a diagnostic scanner to read and clear the fault code.
4. Is it safe to drive my Chrysler with OBDII code P1CCE indicating a Hydraulic Pump Driver Feedback Range-Performance issue?
- It is not recommended to drive the vehicle with this fault code as it can lead to sudden loss of power steering assistance, increasing the risk of accidents. It is advisable to address the issue promptly.
5. What are some repair tips for resolving OBDII code P1CCE in a Chrysler related to the Hydraulic Pump Driver Feedback Range-Performance problem?
- Repair tips may include checking and refilling the power steering fluid, inspecting and repairing any damaged wiring or connectors, replacing the hydraulic pump if necessary, and resetting the fault code using a diagnostic tool.
6. Can a DIY enthusiast fix the OBDII code P1CCE indicating a Hydraulic Pump Driver Feedback Range-Performance issue in a Chrysler?
- While some basic troubleshooting steps can be performed by DIY enthusiasts, resolving this code often requires specialized tools and expertise. It is recommended to consult a professional mechanic for accurate diagnosis and repair.
7. How much does it typically cost to repair OBDII code P1CCE associated with the Hydraulic Pump Driver Feedback Range-Performance issue in a Chrysler?
- The cost of repair can vary depending on the specific cause of the issue, parts needed for replacement, and labor charges. It is advisable to obtain quotes from multiple repair shops for an accurate estimate.
8. Can a low power steering fluid level trigger OBDII code P1CCE in a Chrysler with a Hydraulic Pump Driver Feedback Range-Performance problem?
- Yes, a low power steering fluid level can lead to performance issues in the hydraulic pump driver, triggering the fault code P1CCE. It is important to regularly check and maintain the power steering fluid level to prevent such issues.
9. How long does it typically take to repair OBDII code P1CCE related to the Hydraulic Pump Driver Feedback Range-Performance issue in a Chrysler?
- The repair time can vary based on the complexity of the issue, availability of parts, and the mechanic's schedule. In general, resolving this problem may take a few hours to a full day.
10. Are there any recalls or service bulletins related to OBDII code P1CCE and the Hydraulic Pump Driver Feedback Range-Performance issue in Chrysler vehicles?
- It is recommended to check with your local Chrysler dealership or visit the National Highway Traffic Safety Administration (NHTSA) website for any recalls or service bulletins related to this specific fault code and issue.
Discuss the causes and fixes for P1CCE Chrysler OBDII Code
Code P1CCE Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
