AutoCodes – Chrysler – P1CB3 Chrysler

P1CB3 Chrysler Code - Gear Shift Actuator 3 Engage Failure

Quick Answer

This diagnostic checks for the proper response of the gear shift actuator 5th-R to the Transmission Controller Module (TCM) engage command. Common causes include Faulty Transmission Hydraulic System, Transmission Mechanical Operation Problem, Faulty Transmission Controller Module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1CB3 Chrysler indicates Gear Shift Actuator 3 Engage Failure.
Common causes: Common causes include Faulty Transmission Hydraulic System, Transmission Mechanical Operation Problem, Faulty Transmission Controller Module (TCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,166

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 12, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1CB3 Chrysler Description

This diagnostic checks for the proper response of the gear shift actuator 5th-R to the Transmission Controller Module (TCM) engage command. The gear shift actuator 5th-RV is controlled by the TCM via the electrovalves PPV1 and PPV2. This diagnostic checks the position sensor 5th-R output to confirm that the gear shift actuator 5th-R has moved to the proper position when it is controlled by the TCM and that the gear has been engaged.

OBDII Code P1CB3 Chrysler - Gear Shift Actuator 3 Engage Failure - AutoCodes.com — P1CB3 Chrysler Code - Gear Shift Actuator 3 Engage Failure

What does this mean?

What are the Possible Causes of the DTC P1CB3 Chrysler?

Faulty Transmission Hydraulic System
Transmission Mechanical Operation Problem
Faulty Transmission Controller Module (TCM)

How to Fix the DTC P1CB3 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1CB3 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1CB3 Chrysler code?

Need more information on how to fix the P1CB3 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1CB3 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1CB3 Chrysler Code

1. What does the OBDII code P1CB3 mean on a Chrysler vehicle?

P1CB3 indicates a "Gear Shift Actuator 3 Engage Failure," meaning the transmission control module (TCM) has detected an issue with the actuator responsible for engaging third gear.

2. What are the common symptoms of the P1CB3 code?

Symptoms may include difficulty shifting gears, the vehicle going into limp mode, erratic shifting, or the check engine light being illuminated.

3. What causes the P1CB3 code on a Chrysler vehicle?

Common causes include a faulty gear shift actuator, wiring issues, a damaged transmission control module (TCM), or mechanical problems within the transmission.

4. Can I drive my Chrysler with the P1CB3 code?

Driving with this code is not recommended, as it may lead to further transmission damage or unsafe driving conditions due to shifting issues.

5. How is the P1CB3 code diagnosed?

A mechanic will use a scan tool to confirm the code, inspect the gear shift actuator, check for damaged wiring, and perform tests on the TCM and related components.

6. How do you fix a P1CB3 code on a Chrysler?

Repairs may involve replacing the gear shift actuator, repairing or replacing damaged wiring, reprogramming or replacing the TCM, or addressing internal transmission faults.

7. How much does it cost to repair the P1CB3 code?

Repair costs can range from $200 to $1,500 or more, depending on whether the issue is with the actuator, wiring, TCM, or the transmission itself.

8. Can a low battery cause the P1CB3 code?

Yes, a weak or failing battery can cause voltage issues that may interfere with the operation of the gear shift actuator and trigger the P1CB3 code.

9. Do I need to replace the transmission if I get the P1CB3 code?

Not necessarily. The issue is often related to the gear shift actuator or electrical components. A full transmission replacement is only needed if internal damage is confirmed.

10. Can I clear the P1CB3 code without repairs?

Clearing the code without addressing the underlying issue will likely result in the code returning and may worsen the problem over time. Proper diagnosis and repair are essential.