P1C60 FIAT - Oil Viscosity Sensor Circuit High
P1C60 FIAT Possible Causes
- Faulty Oil Viscosity Sensor
- Oil Viscosity Sensor harness is open or shorted
- Oil Viscosity Sensor circuit poor electrical connection
First diagnose P1C60 FIAT code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P1C60 FIAT code
Labor: 1.0The cost of diagnosing the P1C60 FIAT code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P1C60 FIAT Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1c60 Fiat DescriptionThe output from the viscosity sensor to the Powertrain Control Module (PCM) is a pulse width modulated (PWM) signal that is translated by the PCM into a viscosity value. When the oil temperature is between -25°C (-13°F) and -35°C (-31°F) the PCM will use the signal from the viscosity sensor to determine the oil viscosity level. If the PCM determines that the oil viscosity is too low (oil is too thick), the glow plug light on the dash will flash and a text message will appear on the EVIC instructing the operator to wait to start the engine.
P1C60 FIAT More InformationNeed more information on how to fix the P1C60 FIAT code?
Get Access to Factory Service Manuals
Need more help?Get the P1c60 Fiat code diagnosed by a professional: Find a repair shop in your area
P1C60 FIAT CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1c60 Fiat code? Have you replaced any parts?
Any information is appreciated. Thanks