P1C4E Code - Fault In ABS/ESP Module
Quick Answer
This diagnostic runs continuously when the ignition ON and the battery voltage greater than 10.0 volts. Common causes include Check ABS/ESP Module for codes. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1C4E indicates Fault In ABS/ESP Module.
- Common causes
- Common causes include Check ABS/ESP Module for codes.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1C4E Description
How to Fix the DTC P1C4E?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1C4E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1C4E code?
Need more information on how to fix the P1C4E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1C4E code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1C4E Chrysler — Fault In ABS/ESP Module
- P1C4E Dodge — Fault In ABS/ESP Module
- P1C4E Jeep — Fault In ABS/ESP Module
- P1C4E RAM — Fault In ABS/ESP Module
Frequently Asked Questions about P1C4E Code
1. What are the common symptoms of OBDII code P1C4E related to a fault in the ABS/ESP module?
- Common symptoms include the ABS and traction control lights illuminating on the dashboard, loss of ABS functionality, and potential issues with the vehicle's stability control system.
2. What are some possible causes of OBDII code P1C4E indicating a fault in the ABS/ESP module?
- Possible causes include a faulty ABS/ESP module, damaged wiring or connectors, a failed wheel speed sensor, or issues with the vehicle's power supply to the module.
3. How can I diagnose the OBDII code P1C4E for a fault in the ABS/ESP module?
- Diagnosis typically involves using a diagnostic scanner to retrieve the specific fault code, checking the wiring and connectors for any damage, testing the wheel speed sensors, and inspecting the ABS/ESP module itself.
4. What are some repair tips for resolving OBDII code P1C4E related to a fault in the ABS/ESP module?
- Repair tips may include repairing or replacing damaged wiring or connectors, replacing a faulty wheel speed sensor, or replacing the ABS/ESP module if necessary. It's important to follow manufacturer-specific diagnostic and repair procedures.
5. Can driving with OBDII code P1C4E indicating a fault in the ABS/ESP module be dangerous?
- Driving with this code may pose safety risks due to potential issues with the ABS and stability control systems. It's recommended to address the problem promptly to ensure the vehicle's safety systems are functioning properly.
6. Is it possible to reset the OBDII code P1C4E related to a fault in the ABS/ESP module by clearing the fault codes?
- Clearing the fault codes may temporarily remove the warning lights, but if the underlying issue causing the fault code is not addressed, the code is likely to reappear. It's essential to diagnose and repair the root cause of the problem.
7. How much does it typically cost to repair OBDII code P1C4E for a fault in the ABS/ESP module?
- The cost of repair can vary depending on the specific cause of the fault, the parts needed for replacement, and labor costs. It's advisable to consult a professional mechanic for an accurate diagnosis and cost estimate.
8. Can a DIY enthusiast with automotive knowledge fix OBDII code P1C4E related to a fault in the ABS/ESP module?
- Depending on the DIY enthusiast's skills and access to tools, it may be possible to address simpler causes such as damaged wiring or connectors. However, more complex issues may require professional diagnosis and repair to ensure proper functionality.
9. Are there any recalls or technical service bulletins related to OBDII code P1C4E for the ABS/ESP module in specific vehicle models?
- It's recommended to check with the vehicle manufacturer or authorized dealerships for any recalls or technical service bulletins related to this specific fault code in your vehicle model. These resources may provide valuable information on known issues and solutions.
10. How can I prevent OBDII code P1C4E from occurring in the future after repairing a fault in the ABS/ESP module?
- Regular maintenance, such as checking and maintaining the ABS/ESP system components, ensuring proper electrical connections, and addressing any warning signs promptly, can help prevent the recurrence of this fault code in the future.
Discuss the causes and fixes for P1C4E OBDII Code
-
If the code p1c4e is detected does this mean my dodge ram truck wont start. I cant get it to turn over. I recently had the water pump replaced
-
It was running fine. Parked it, ran into store. Came back out minutes later to it not turning over. Truck had power
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
