AutoCodes – Saturn – P1BE6 Saturn

P1BE6 Saturn Code - Hybrid/Electric Vehicle Battery 86 Circuit High Voltage

Quick Answer

The Hybrid/Electric Vehicle battery pack contains 288 cells. Common causes include Faulty Hybrid/Electric Vehicle Battery Pack, Faulty Hybrid/Electric Vehicle Battery Interface Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1BE6 Saturn indicates Hybrid/Electric Vehicle Battery 86 Circuit High Voltage.
Common causes: Common causes include Faulty Hybrid/Electric Vehicle Battery Pack, Faulty Hybrid/Electric Vehicle Battery Interface Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,033

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1BE6 Saturn Description

The Hybrid/Electric Vehicle battery pack contains 288 cells. Groups of three cells are welded together in parallel. There are a total of 96 cell groups in the hybrid/EV battery pack assembly. These cell groups are electrically connected in-series. Each individual cell group is rated at 3.7 V, for a nominal system voltage of 355 V direct current. The battery cells are also grouped together into three sections. The first 90 cells/30 cell groups make up battery section one. This section is adjacent to the cowl and contains batteries 67 through to 96. Battery section two is located behind section one. It is made up of 72 cells/24 cell groups and contains batteries 43 through to 66. The transverse battery section is section number three, it is made up of the remaining 126 cells/42 cell groups and contains batteries 1 through to 42. The three battery sections are individually serviceable components.
The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybrid/EV battery interface control modules. Voltage sense circuits are attached to each individual cell group, and these sense circuits terminate at a connector located on the top surface of the battery section. A serviceable auxiliary battery wiring harness joins this connector to a hybrid/EV battery interface control module, also located on the top surface of the battery section. The hybrid/EV battery interface control module encodes the voltage reading and transmits it to the battery energy control module through the battery control harness. There is one hybrid/EV battery interface control module located on battery sections one and two, and two hybrid/EV battery interface control modules associated with battery section three. The hybrid/EV battery interface control module, battery energy control module wiring harness, auxiliary battery wiring harness, and battery energy control module are all considered serviceable components.
The battery energy control module will determine when a fault condition is present. Diagnostics and system status are communicated from the battery energy control module to hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic trouble code information.

OBDII Code P1BE6 Saturn - Hybrid/Electric Vehicle Battery 86 Circuit High Voltage - AutoCodes.com — P1BE6 Saturn Code - Hybrid/Electric Vehicle Battery 86 Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P1BE6 Saturn?

Faulty Hybrid/Electric Vehicle Battery Pack
Faulty Hybrid/Electric Vehicle Battery Interface Control Module

How to Fix the DTC P1BE6 Saturn?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1BE6 Saturn code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1BE6 Saturn code?

Need more information on how to fix the P1BE6 Saturn code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1BE6 Saturn code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1BE6 Saturn Code

1. What are the common symptoms of OBDII code P1BE6 in a Saturn Hybrid/Electric Vehicle?

- Common symptoms include the check engine light illuminating, decreased fuel efficiency, and potential issues with the vehicle's hybrid/electric system.

2. What could cause the OBDII code P1BE6 in a Saturn Hybrid/Electric Vehicle?

- The code P1BE6 typically indicates a high voltage in the hybrid/electric vehicle battery 86 circuit, which could be caused by a faulty battery module, wiring issues, or a malfunctioning battery management system.

3. How can I diagnose the OBDII code P1BE6 in my Saturn Hybrid/Electric Vehicle?

- Diagnosing the code P1BE6 requires a scan tool to read the specific trouble code and further testing to pinpoint the exact cause, such as checking the battery voltage, inspecting wiring connections, and performing battery system tests.

4. Is it safe to continue driving my Saturn with the OBDII code P1BE6 present?

- It is not recommended to continue driving the vehicle with the code P1BE6 present, as it could lead to further damage to the hybrid/electric system and potentially unsafe driving conditions.

5. Can I repair the OBDII code P1BE6 in my Saturn Hybrid/Electric Vehicle myself?

- Repairing the code P1BE6 may require specialized knowledge and tools related to hybrid/electric vehicle systems. It is advisable to seek professional assistance from a certified technician with experience in hybrid/electric vehicle repair.

6. What are the potential risks of ignoring the OBDII code P1BE6 in my Saturn Hybrid/Electric Vehicle?

- Ignoring the code P1BE6 can result in reduced performance, decreased fuel efficiency, and potential damage to the hybrid/electric vehicle battery system, leading to costly repairs in the future.

7. How much does it typically cost to repair the OBDII code P1BE6 in a Saturn Hybrid/Electric Vehicle?

- The cost of repairing the code P1BE6 can vary depending on the specific cause of the issue, but it may involve replacing faulty battery components, repairing wiring, or recalibrating the battery management system, which could range from a few hundred to several thousand dollars.

8. Are there any preventive maintenance measures I can take to avoid the OBDII code P1BE6 in my Saturn Hybrid/Electric Vehicle?

- Regularly servicing your hybrid/electric vehicle, including checking the battery health, ensuring proper charging habits, and addressing any warning signs promptly, can help prevent issues like the code P1BE6 from occurring.

9. Can the OBDII code P1BE6 in a Saturn Hybrid/Electric Vehicle affect the overall performance of the vehicle?

- Yes, the code P1BE6 can impact the performance of the vehicle by causing issues with the hybrid/electric system, leading to reduced power output, decreased fuel efficiency, and potential drivability issues.

10. How long does it typically take to repair the OBDII code P1BE6 in a Saturn Hybrid/Electric Vehicle?

- The repair time for the code P1BE6 can vary depending on the complexity of the issue, availability of parts, and the technician's experience. It may take anywhere from a few hours to a few days to complete the necessary repairs.