AutoCodes – Buick – P1B4B Buick

P1B4B Buick Code - Hybrid/Electric Vehicle Battery 35 Circuit Performance

Quick Answer

The Hybrid/Electric Vehicle battery pack contains 288 cells. Common causes include Faulty Hybrid/Electric Vehicle Battery Pack, Faulty Hybrid/Electric Vehicle Battery Interface Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1B4B Buick indicates Hybrid/Electric Vehicle Battery 35 Circuit Performance.
Common causes: Common causes include Faulty Hybrid/Electric Vehicle Battery Pack, Faulty Hybrid/Electric Vehicle Battery Interface Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 898

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 08, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1B4B Buick Description

The Hybrid/Electric Vehicle battery pack contains 288 cells. Groups of three cells are welded together in parallel. There are a total of 96 cell groups in the hybrid/EV battery pack assembly. These cell groups are electrically connected in-series. Each individual cell group is rated at 3.7 V, for a nominal system voltage of 355 V direct current. The battery cells are also grouped together into three sections. The first 90 cells/30 cell groups make up battery section one. This section is adjacent to the cowl and contains batteries 67 through to 96. Battery section two is located behind section one. It is made up of 72 cells/24 cell groups and contains batteries 43 through to 66. The transverse battery section is section number three, it is made up of the remaining 126 cells/42 cell groups and contains batteries 1 through to 42. The three battery sections are individually serviceable components.
The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybrid/EV battery interface control modules. Voltage sense circuits are attached to each individual cell group, and these sense circuits terminate at a connector located on the top surface of the battery section. A serviceable auxiliary battery wiring harness joins this connector to a hybrid/EV battery interface control module, also located on the top surface of the battery section. The hybrid/EV battery interface control module encodes the voltage reading and transmits it to the battery energy control module through the battery control harness. There is one hybrid/EV battery interface control module located on battery sections one and two, and two hybrid/EV battery interface control modules associated with battery section three. The hybrid/EV battery interface control module, battery energy control module wiring harness, auxiliary battery wiring harness, and battery energy control module are all considered serviceable components.
The battery energy control module will determine when a fault condition is present. Diagnostics and system status are communicated from the battery energy control module to hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic trouble code information.

OBDII Code P1B4B Buick - Hybrid/Electric Vehicle Battery 35 Circuit Performance - AutoCodes.com — P1B4B Buick Code - Hybrid/Electric Vehicle Battery 35 Circuit Performance

What does this mean?

What are the Possible Causes of the DTC P1B4B Buick?

Faulty Hybrid/Electric Vehicle Battery Pack
Faulty Hybrid/Electric Vehicle Battery Interface Control Module

How to Fix the DTC P1B4B Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1B4B Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1B4B Buick code?

Need more information on how to fix the P1B4B Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1B4B Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1B4B Buick Code

1. What does the OBDII code P1B4B mean on a Buick?

P1B4B indicates an issue with the Hybrid/Electric Vehicle Battery 35 Circuit Performance, meaning the vehicle's control module has detected irregularities in the performance of the battery circuit for cell 35.

2. What are the common symptoms of a P1B4B code in a Buick?

Symptoms may include a check engine light, reduced hybrid system performance, diminished fuel efficiency, or the vehicle entering limp mode.

3. What causes the P1B4B code to appear on a Buick?

Common causes include a faulty battery cell, damaged wiring or connectors in the battery circuit, a malfunctioning battery control module, or corrosion affecting connections.

4. Can I drive my Buick with a P1B4B code?

It is not advisable to drive for extended periods, as this code can lead to reduced performance or further damage to the hybrid system components.

5. How is the P1B4B code diagnosed?

A technician will use a scan tool to check the code, inspect the hybrid battery, test the affected circuit, and verify the integrity of wiring and connections.

6. What repairs are needed to fix the P1B4B code?

Repairs may include replacing the faulty battery cell, repairing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the battery control module.

7. How much does it cost to repair a P1B4B code on a Buick?

Costs vary depending on the issue. Minor wiring repairs may cost a few hundred dollars, while battery module replacement can range from $1,000 to $4,000.

8. Can a weak 12V battery cause the P1B4B code?

While unlikely, a weak 12V battery can sometimes impact the hybrid system's performance and cause related trouble codes. Testing the 12V battery is a good starting point.

9. Is the P1B4B code specific to Buicks?

No, this code can appear on other hybrid or electric vehicles as well, but the specifics of the repair may differ depending on the make and model.

10. Can I clear the P1B4B code without fixing the issue?

Clearing the code without addressing the root cause will only temporarily disable the warning. The issue will likely return, potentially causing further damage or safety concerns.