AutoCodes – Chevrolet – P1B41 Chevrolet

P1B41 Chevrolet Code - Drive Motor 1 Control Module Hybrid/EV Battery Voltage Isolation Sensing Performance

Quick Answer

The power inverter module, often referred to as the drive motor generator power inverter module, contains three motor control modules and the hybrid/EV powertrain control module 1. Common causes include Faulty Hybrid/Electric Vehicle Battery Pack. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1B41 Chevrolet indicates Drive Motor 1 Control Module Hybrid/EV Battery Voltage Isolation Sensing Performance.
Common causes: Common causes include Faulty Hybrid/Electric Vehicle Battery Pack.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,363

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 12, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1B41 Chevrolet Description

The power inverter module, often referred to as the drive motor generator power inverter module, contains three motor control modules and the hybrid/EV powertrain control module 1. Two of the motor control modules operate their respective drive motor based upon power inverter module commands. The third motor control module controls the auxiliary transmission fluid pump. The motor control modules and the hybrid/EV powertrain control module 1 are part of the power inverter module and are not serviced separately.
The motor control modules test for isolation between each high voltage bus and vehicle chassis whenever high voltage is present at the power inverter module.

OBDII Code P1B41 Chevrolet - Drive Motor 1 Control Module Hybrid/EV Battery Voltage Isolation Sensing Performance - AutoCodes.com — P1B41 Chevrolet Code - Drive Motor 1 Control Module Hybrid/EV Battery Voltage Isolation Sensing Performance

What does this mean?

What are the Possible Causes of the DTC P1B41 Chevrolet?

Faulty Hybrid/Electric Vehicle Battery Pack

How to Fix the DTC P1B41 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1B41 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1B41 Chevrolet code?

Need more information on how to fix the P1B41 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1B41 Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1B41 Chevrolet Code

What does the OBDII code P1B41 mean on a Chevrolet?

The P1B41 code indicates an issue with the Drive Motor 1 Control Module's ability to monitor the hybrid/EV battery's voltage isolation performance, which is crucial for system safety and operation.

What are the common symptoms of the P1B41 code?

Common symptoms include the illumination of the check engine light, reduced vehicle performance, limited EV mode functionality, and potential drivetrain warnings.

What causes the P1B41 code to appear?

The code is typically caused by a fault in the hybrid/EV battery isolation sensing circuit, damaged wiring, a faulty Drive Motor 1 Control Module, or a degraded hybrid/EV battery.

Is the P1B41 code serious?

Yes, it is serious since it involves the hybrid/EV battery's isolation performance, which ensures electrical safety and proper operation. It should be diagnosed and repaired promptly to avoid further issues.

Can I drive my vehicle with the P1B41 code?

Driving with this code is not recommended, as it may reduce performance, potentially cause damage to the hybrid/EV system, or pose a safety risk due to electrical faults.

How is the P1B41 code diagnosed?

A technician will use a scan tool to retrieve the code, inspect the hybrid/EV battery isolation sensors, check wiring and connections, and perform voltage and resistance tests on the affected circuit.

What repairs are needed to fix the P1B41 code?

Repairs may include replacing damaged wiring, repairing poor connections, replacing the hybrid/EV battery isolation sensor, or replacing the Drive Motor 1 Control Module if faulty.

Can low battery voltage cause the P1B41 code?

Yes, low or unstable voltage in the hybrid/EV battery system can trigger this code, as it may interfere with the isolation sensing circuit's performance.

What tools are required to fix the P1B41 code?

Repairing this code may require a professional scan tool, a multimeter for circuit testing, and possibly specialized tools for accessing and repairing hybrid/EV system components.

Does the P1B41 code require reprogramming the control module?

In some cases, reprogramming or updating the Drive Motor 1 Control Module software may be necessary after repairs to ensure proper functionality.