AutoCodes – GMC – P1B11 GMC

P1B11 GMC Code - Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost

Quick Answer

The vehicle is equipped with a high voltage isolation monitor feature. Common causes include Perform the Hybrid/EV Battery Low State of Charge Recovery. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1B11 GMC indicates Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost.
Common causes: Common causes include Perform the Hybrid/EV Battery Low State of Charge Recovery.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 248

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 26, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1B11 GMC Description

The vehicle is equipped with a high voltage isolation monitor feature. The purpose of the isolation monitor is to test the resistance between the high voltage positive and negative Direct Current (DC) bus and chassis ground. The isolation monitoring system measures the resistance between the high voltage system and chassis ground in the following way: The isolation monitoring system measures voltage potential difference between the positive battery mid pack voltage and chassis ground as well as the voltage difference between negative battery mid pack voltage and chassis ground. Additionally, the isolation monitor detects high frequency AC voltage between negative battery mid pack voltage and chassis ground. If any of the phases of the starter/generator lose isolation to chassis ground, a DC offset is created, causing the negative battery mid pack voltage to increase.
The Diagnostic Trouble Code (DTC) will be set when the AC component of the voltage potential difference between the negative battery mid pack voltage and chassis ground is greater than 10 V for 1 s.

OBDII Code P1B11 GMC - Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost - AutoCodes.com — P1B11 GMC Code - Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost

What does this mean?

What are the Possible Causes of the DTC P1B11 GMC?

Perform the Hybrid/EV Battery Low State of Charge Recovery

How to Fix the DTC P1B11 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1B11 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1B11 GMC code?

Need more information on how to fix the P1B11 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1B11 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1B11 GMC Code

1. What are the common symptoms of OBDII code P1B11 GMC?

- Common symptoms include a check engine light, reduced hybrid/EV system performance, and potential drivability issues.

2. What causes the Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost code?

- This code is typically caused by electrical faults, such as a malfunctioning drive motor control module, wiring issues, or a faulty hybrid/EV AC voltage system component.

3. How can I diagnose the cause of OBDII code P1B11 GMC?

- Diagnosing this code usually involves using a scan tool to retrieve the specific fault codes, checking the electrical connections and wiring, and potentially testing the drive motor control module and related components.

4. What are some repair tips for fixing the Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost code?

- Repair tips may include checking and repairing any damaged or loose wiring, replacing faulty components like the drive motor control module or AC voltage system components, and ensuring all connections are secure.

5. Can I drive my vehicle with the P1B11 GMC code present?

- It is not recommended to drive the vehicle with this code present, as it can affect the performance and safety of the hybrid/EV system. It's best to address the issue promptly.

6. Are there any recalls related to OBDII code P1B11 GMC?

- It's advisable to check with GMC or a certified dealership to see if there are any recalls related to this specific code, as some issues may be covered under warranty.

7. Is it possible to reset the P1B11 GMC code without fixing the underlying issue?

- While you can clear the code with a scan tool, it is not recommended to do so without addressing the root cause, as the problem may persist and potentially lead to further damage.

8. How much does it typically cost to repair OBDII code P1B11 GMC?

- The cost of repair can vary depending on the exact cause of the code, the labor rates in your area, and whether any components need to be replaced. It's best to consult a professional for an accurate estimate.

9. Can a DIY enthusiast fix the Drive Motor Control Module Hybrid/EV AC Voltage System Isolation Lost code?

- While some experienced DIY enthusiasts may be able to diagnose and repair this code, it often involves complex electrical systems and components specific to hybrid/EV vehicles. It's recommended to seek professional help if unsure.

10. How can I prevent OBDII code P1B11 GMC from reoccurring in the future?

- To prevent this code from reoccurring, regular maintenance, checking the hybrid/EV system components for wear or damage, and addressing any electrical issues promptly can help maintain system integrity.