P1AFA Buick Code - Drive Motor 1 Control Module Programmable Logic Device Not Programmed
Quick Answer
This diagnostic applies to internal microprocessor integrity conditions within the Hybrid Powertrain Control Module (HPCM). Common causes include Reprogram Power Inverter Control Module (PIM), Faulty Power Inverter Control Module (PIM), Power Inverter Control Module (PIM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1AFA Buick indicates Drive Motor 1 Control Module Programmable Logic Device Not Programmed.
- Common causes
- Common causes include Reprogram Power Inverter Control Module (PIM), Faulty Power Inverter Control Module (PIM), Power Inverter Control Module (PIM) harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1AFA Buick Description
What are the Possible Causes of the DTC P1AFA Buick?
- Reprogram Power Inverter Control Module (PIM)
- Faulty Power Inverter Control Module (PIM)
- Power Inverter Control Module (PIM) harness is open or shorted
- Power Inverter Control Module (PIM) circuit poor electrical connection
How to Fix the DTC P1AFA Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1AFA Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1AFA Buick code?
Need more information on how to fix the P1AFA Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1AFA Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1AFA Buick Code
1. What does the OBDII code P1AFA mean on a Buick?
The P1AFA code indicates that the Drive Motor 1 Control Module’s Programmable Logic Device (PLD) is not programmed or has lost its programming.
2. What are the common symptoms of the P1AFA code in a Buick?
Symptoms may include the Check Engine Light turning on, reduced vehicle performance, or the vehicle entering a limp mode.
3. What causes the P1AFA code to appear in a Buick?
The primary cause is typically a lack of programming or corrupted programming in the Drive Motor 1 Control Module's Programmable Logic Device.
4. Can I drive my Buick with the P1AFA code?
It is not recommended to drive your vehicle with this code, as it may result in reduced performance or further damage to the control module.
5. How is the P1AFA code diagnosed?
A technician will use a scan tool to confirm the code, check the programming status of the Drive Motor 1 Control Module, and inspect related wiring and connectors.
6. How can the P1AFA code be fixed in a Buick?
The module may need to be reprogrammed using a GM-approved scan tool, or, in some cases, the module may require replacement.
7. Can I reprogram the Drive Motor 1 Control Module in my Buick myself?
Reprogramming typically requires advanced diagnostic equipment and software that is only available to authorized repair facilities or dealerships.
8. Is the P1AFA code specific to Buick vehicles?
While this code is most commonly associated with Buick hybrid or electric models, it may also appear in other GM vehicles with similar systems.
9. How much does it cost to fix the P1AFA code?
Repair costs can vary, but reprogramming the module typically ranges from $150 to $300. If the module needs replacement, the cost could be higher.
10. Can a dead battery cause the P1AFA code in a Buick?
Yes, a dead or weak battery can sometimes lead to programming loss in control modules, triggering the P1AFA code.
Discuss the causes and fixes for P1AFA Buick OBDII Code
Code P1AFA Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
