P1AAC GMC Code - Phase V Open/Short Fault
Quick Answer
The Starter/Generator Control Module (SGCM) unit is an electronic device that works in conjunction with the electrical subsystem to efficiently perform DC/DC and DC/AC electrical energy conversion and support vehicle functions. Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1AAC GMC indicates Phase V Open/Short Fault.
- Common causes
- Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1AAC GMC Description
This SGCM will have 2 functions. The first will be monitoring, where the DC voltage is transformed into 3-phase A/C power to the Starter Generator interface. In this case, energy flows from battery 36-volt to Phase 1, Phase 2, Phase 3. The second case will be generating, where the 3-phase A/C power is used to charge the 36 V battery pack. In this case, energy flows from Phase 1, Phase 2, Phase 3 to battery 36-volt. If the values of Starter Generator Speed and Starter Generator Torque are zero, then the Starter Generator Control will be disabled and the Starter Generator Inverter is not transferring or consuming any power.
3-Phase A/C Current will be defined as the current value of Phase 1. The current will be bidirectional, with positive representing discharging the batteries and negative representing charging the batteries.
What are the Possible Causes of the DTC P1AAC GMC?
- Faulty Starter/Generator Control Module (SGCM)
- Starter/Generator Control Module (SGCM) harness is open or shorted
- Starter/Generator Control Module (SGCM) circuit poor electrical connection
How to Fix the DTC P1AAC GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1AAC GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1AAC GMC code?
Need more information on how to fix the P1AAC GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1AAC GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1AAC GMC Code
1. What are the common symptoms of OBDII code P1AAC GMC (Phase V Open/Short Fault)?
- Common symptoms include rough idling, poor engine performance, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P1AAC GMC?
- The code P1AAC GMC usually indicates a fault related to the Phase V circuit, such as open circuits, short circuits, or faulty components.
3. How can I diagnose the Phase V Open/Short Fault associated with code P1AAC GMC?
- Diagnosing this fault typically involves inspecting the Phase V circuit for open or short circuits, checking the wiring harness, and testing related components like the solenoid.
4. Can a faulty Phase V solenoid trigger OBDII code P1AAC GMC?
- Yes, a malfunctioning Phase V solenoid can cause the code P1AAC GMC to be triggered due to issues with the circuit operation.
5. What are some repair tips for addressing OBDII code P1AAC GMC?
- Repair tips may include checking and repairing any damaged wiring, replacing the Phase V solenoid if faulty, and resetting the fault code to see if it returns.
6. Is it safe to drive with OBDII code P1AAC GMC present?
- Driving with the code P1AAC GMC present is not recommended as it can lead to reduced engine performance and potential further damage if left unresolved.
7. Can a loose electrical connection cause OBDII code P1AAC GMC to appear?
- Yes, a loose or poor electrical connection in the Phase V circuit can trigger the code P1AAC GMC due to disruptions in the circuit operation.
8. How do I reset the Check Engine Light after repairing OBDII code P1AAC GMC?
- You can reset the Check Engine Light using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the fault code.
9. Are there any recalls or technical service bulletins related to OBDII code P1AAC GMC?
- It is advisable to check with a dealership or the manufacturer for any recalls or technical service bulletins related to the code P1AAC GMC for your specific vehicle.
10. Can a damaged PCM (Powertrain Control Module) cause OBDII code P1AAC GMC to persist?
- A damaged PCM can potentially cause the code P1AAC GMC to persist if it is unable to properly control the Phase V circuit or communicate with related components.
Discuss the causes and fixes for P1AAC GMC OBDII Code
Code P1AAC GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
