AutoCodes – Saturn – P1A9B Saturn

P1A9B Saturn Code - Starter/Generator Inverter Phase U Temperature Sensor Performance

Quick Answer

The Power Inverter Module (PIM) temperature 1 sensor is used for overheat protection. Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1A9B Saturn indicates Starter/Generator Inverter Phase U Temperature Sensor Performance.
Common causes
Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,853
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 24, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1A9B Saturn Description

The Power Inverter Module (PIM) temperature 1 sensor is used for overheat protection. The thermistor is located on the control board, near the phase W power MOSFET. The Starter/Generator Control Module (SGCM) monitors the inverter temperature sensor to detect the failure of the inverter temperature sensor circuit using rationality of other temperature sensors to determine if it is out of range.
OBDII Code P1A9B Saturn - Starter/Generator Inverter Phase U Temperature Sensor Performance - AutoCodes.com
P1A9B Saturn Code - Starter/Generator Inverter Phase U Temperature Sensor Performance

What are the Possible Causes of the DTC P1A9B Saturn?

  • Faulty Starter/Generator Control Module (SGCM)
  • Starter/Generator Control Module (SGCM) harness is open or shorted
  • Starter/Generator Control Module (SGCM) circuit poor electrical connection

How to Fix the DTC P1A9B Saturn?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1A9B Saturn code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1A9B Saturn code?

Need more information on how to fix the P1A9B Saturn code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1A9B Saturn code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1A9B Saturn Code

1. What are the common symptoms of OBDII code P1A9B in a Saturn related to the Starter/Generator Inverter Phase U Temperature Sensor Performance?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential issues with starting the vehicle.

2. What are the possible causes of OBDII code P1A9B in a Saturn related to the Starter/Generator Inverter Phase U Temperature Sensor Performance?

- Possible causes may include a faulty temperature sensor, wiring issues, or problems with the inverter phase U circuit.

3. How can I diagnose the OBDII code P1A9B in my Saturn for the Starter/Generator Inverter Phase U Temperature Sensor Performance issue?

- To diagnose this issue, it is recommended to use an OBDII scanner to retrieve the specific fault code and then check the temperature sensor, wiring, and related components for any visible damage or malfunctions.

4. Can I still drive my Saturn with the OBDII code P1A9B related to Starter/Generator Inverter Phase U Temperature Sensor Performance?

- It is not recommended to drive the vehicle with this code present, as it may lead to further damage or unsafe driving conditions. It's best to address the issue promptly.

5. How can I repair the OBDII code P1A9B in my Saturn related to the Starter/Generator Inverter Phase U Temperature Sensor Performance?

- Repairing this code may involve replacing the faulty temperature sensor, repairing any damaged wiring, or addressing issues with the inverter phase U circuit as needed.

6. Are there any DIY tips for troubleshooting the OBDII code P1A9B in a Saturn for the Starter/Generator Inverter Phase U Temperature Sensor Performance issue?

- DIY tips may include visually inspecting the temperature sensor and wiring connections, checking for any loose or damaged components, and clearing the fault code to see if it returns.

7. How critical is it to address the OBDII code P1A9B in my Saturn related to the Starter/Generator Inverter Phase U Temperature Sensor Performance?

- It is important to address this code promptly to prevent potential damage to the vehicle's components and ensure optimal performance and safety while driving.

8. Can weather conditions affect the occurrence of OBDII code P1A9B in a Saturn related to Starter/Generator Inverter Phase U Temperature Sensor Performance?

- Extreme weather conditions, such as high temperatures or humidity, can potentially impact the performance of the temperature sensor and trigger this fault code.

9. How much can I expect to pay for professional repairs for the OBDII code P1A9B in my Saturn related to Starter/Generator Inverter Phase U Temperature Sensor Performance?

- Repair costs can vary depending on the exact cause of the issue, but it's advisable to consult with a qualified mechanic for an accurate diagnosis and estimate.

10. Is it possible to prevent the recurrence of OBDII code P1A9B in my Saturn related to Starter/Generator Inverter Phase U Temperature Sensor Performance?

- Regular maintenance checks, including inspecting the temperature sensor and related components, can help prevent the recurrence of this code.

Discuss the causes and fixes for P1A9B Saturn OBDII Code

Code P1A9B Saturn comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play