P1A95 GMC Code - DC/DC Converter Stuck in 14-42 Volt Direction
Quick Answer
The purpose of the Accessory Power Module (APM), integral to the Starter/Generator Control Module (SGCM), is to control the amount and direction of energy flowing between the 42 V DC and 14 V DC buses via the APM, bi-directional 42 V DC to a 14 V DC converter. Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1A95 GMC indicates DC/DC Converter Stuck in 14-42 Volt Direction.
- Common causes
- Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1A95 GMC Description
When the APM Power Conversion direction is set to a value of 42 V to 14 V, the energy will flow from the 42 V DC Bus to the 14 V DC Bus via the APM. When the Service Charge or jump start is requested, the energy will flow from the 14 V DC Bus to the 42 V DC Bus via the APM. When the APM Power Conversion direction is set to a value of Off, the APM will be turned OFF and not consume or transfer any power. When the APM Power Conversion direction is set to a value of Invalid, the energy will flow from the 42 V DC Bus to the 14 V DC Bus via the APM.
What are the Possible Causes of the DTC P1A95 GMC?
- Faulty Starter/Generator Control Module (SGCM)
- Starter/Generator Control Module (SGCM) harness is open or shorted
- Starter/Generator Control Module (SGCM) circuit poor electrical connection
How to Fix the DTC P1A95 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1A95 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1A95 GMC code?
Need more information on how to fix the P1A95 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1A95 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1A95 GMC Code
1. What are the common symptoms of OBDII code P1A95 in a GMC vehicle?
- Common symptoms include poor fuel economy, reduced engine performance, and potential issues with the vehicle's electrical system.
2. What does the OBDII code P1A95 "DC/DC Converter Stuck in 14-42 Volt Direction" mean in a GMC vehicle?
- This code indicates a malfunction in the DC/DC converter, which is responsible for converting high voltage to low voltage in hybrid or electric vehicles.
3. What are the possible causes of OBDII code P1A95 in a GMC vehicle?
- Possible causes include a faulty DC/DC converter, damaged wiring or connectors, issues with the battery management system, or software glitches.
4. How serious is OBDII code P1A95 in a GMC vehicle?
- This code should be addressed promptly to prevent further damage to the vehicle's electrical system and ensure optimal performance and fuel efficiency.
5. Can OBDII code P1A95 be fixed without professional help?
- While some DIY enthusiasts may attempt to address this code, it is recommended to seek professional assistance due to the complexity of the electrical components involved.
6. How is OBDII code P1A95 diagnosed in a GMC vehicle?
- Diagnosis typically involves using a OBDII scanner to retrieve the code, conducting a visual inspection of the DC/DC converter and related components, and performing electrical tests.
7. What are some repair tips for resolving OBDII code P1A95 in a GMC vehicle?
- Repair tips may include checking and repairing any damaged wiring, replacing the DC/DC converter if necessary, updating software, and resetting the fault code.
8. Can driving with OBDII code P1A95 cause further damage to the vehicle?
- Continuing to drive with this code may lead to issues with the vehicle's electrical system, reduced fuel efficiency, and potential drivability problems.
9. How much does it typically cost to repair OBDII code P1A95 in a GMC vehicle?
- The cost of repairs can vary depending on the extent of the issue, parts needed, and labor costs, but it's advisable to budget for several hundred dollars for this type of repair.
10. Is it safe to drive a GMC vehicle with the OBDII code P1A95 present?
- It is not recommended to drive the vehicle with this code present, as it can impact the vehicle's performance and potentially lead to more serious issues if left unresolved.
Discuss the causes and fixes for P1A95 GMC OBDII Code
Code P1A95 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
