AutoCodesCadillac – P1A8F Cadillac

P1A8F Cadillac Code - 14 Volt Power Module Current Sensor Overcurrent

Quick Answer

The Starter/Generator Control Module (SGCM) monitors the 14-volt power module current sensor for an overcurrent condition to protect the MOSFET. Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1A8F Cadillac indicates 14 Volt Power Module Current Sensor Overcurrent.
Common causes
Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,144
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 24, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1A8F Cadillac Description

The Starter/Generator Control Module (SGCM) monitors the 14-volt power module current sensor for an overcurrent condition to protect the MOSFET. In the hardware, an overcurrent protection circuit is used to limit the current, and software monitors for an overcurrent reading in the sensor.
OBDII Code P1A8F Cadillac - 14 Volt Power Module Current Sensor Overcurrent - AutoCodes.com
P1A8F Cadillac Code - 14 Volt Power Module Current Sensor Overcurrent

What are the Possible Causes of the DTC P1A8F Cadillac?

  • Faulty Starter/Generator Control Module (SGCM)
  • Starter/Generator Control Module (SGCM) harness is open or shorted
  • Starter/Generator Control Module (SGCM) circuit poor electrical connection

How to Fix the DTC P1A8F Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1A8F Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1A8F Cadillac code?

Need more information on how to fix the P1A8F Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1A8F Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1A8F Cadillac Code

1. What does the OBDII code P1A8F mean on a Cadillac?

P1A8F indicates an issue with the 14 Volt Power Module Current Sensor, specifically detecting an overcurrent condition.

2. What are the symptoms of the P1A8F code in a Cadillac?

Common symptoms include a check engine light, potential charging system warnings, reduced fuel efficiency, and possible electrical system malfunctions.

3. What causes the P1A8F code to appear?

The code is typically triggered by a faulty current sensor, wiring issues, short circuits, or problems with the 14 Volt Power Module itself.

4. Can I drive my Cadillac with the P1A8F code active?

While the car may still be drivable, it’s not recommended as ignoring the issue could lead to further electrical problems or battery failure.

5. How do I fix the P1A8F code on my Cadillac?

Repair may involve inspecting and replacing the 14 Volt Power Module Current Sensor, addressing wiring issues, or replacing the module if necessary.

6. How much does it cost to repair a P1A8F code on a Cadillac?

The repair cost varies but can range from $200 to $800 depending on whether the sensor, module, or wiring needs replacement.

7. Can a dead battery cause the P1A8F code to trigger?

A dead or failing battery is unlikely to directly trigger this code, but electrical issues related to the battery could contribute to the problem.

8. What tools are needed to diagnose the P1A8F code?

A reliable OBDII scanner, a multimeter for testing wiring, and service manual information for your Cadillac are essential tools for diagnosis.

9. How do I clear the P1A8F code after repairs?

Use an OBDII scanner to clear the code once the issue is resolved, but ensure all repairs are verified to prevent recurrence.

10. Is the P1A8F code specific to Cadillacs?

Yes, the P1A8F code is specific to certain Cadillac models and relates to their 14 Volt Power Module system.

Discuss the causes and fixes for P1A8F Cadillac OBDII Code

Code P1A8F Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play