P1A8B GMC Code - Volt Inverter Temperature High
Quick Answer
The Accessory Power Module (APM) controls the energy flowing between the high voltage, 300-volt, direct current (DC) and intermediate voltage, 42-volt, DC to support the Electric Power Steering (EPS). Common causes include Restricted radiator air flow or coolant fans inoperative, Restricted power electronics coolant flow or contaminated coolant, Inoperative power electronics cooling system water pump. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1A8B GMC indicates Volt Inverter Temperature High.
- Common causes
- Common causes include Restricted radiator air flow or coolant fans inoperative, Restricted power electronics coolant flow or contaminated coolant, Inoperative power electronics cooling system water pump.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1A8B GMC Description
Heat is generated in the 42-volt APM circuit solely through the demand for use of the EPS. The Engine Control Module (ECM) measures the temperature of the Power Electronics Cooling Loop and commands the flow of 2 electrical coolant pumps. The APM transfers heat in the 42-volt circuit to the APM Heat Plate which is then dissipated at the Power Electronics Front End Heat Exchanger.
Based on the severity of an overheat condition in the 42-volt circuit, the APM will make decisions ranging from notification of an over temperature condition to the EPS to completely shutting down the 42-volt power conversion.
What are the Possible Causes of the DTC P1A8B GMC?
- Restricted radiator air flow or coolant fans inoperative
- Restricted power electronics coolant flow or contaminated coolant
- Inoperative power electronics cooling system water pump
- Faulty Accessory Power Module (APM)
- Accessory Power Module (APM) harness is open or shorted
- Accessory Power Module (APM) circuit poor electrical connection
How to Fix the DTC P1A8B GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1A8B GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1A8B GMC code?
Need more information on how to fix the P1A8B GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1A8B GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1A8B GMC Code
1. What are the common symptoms of OBDII code P1A8B GMC (Volt Inverter Temperature High)?
- Common symptoms include the check engine light illuminating, reduced vehicle performance, and potential overheating issues.
2. What are the possible causes of OBDII code P1A8B GMC?
- The code P1A8B GMC can be triggered by a faulty temperature sensor, a malfunctioning inverter cooling system, or issues with the inverter itself.
3. How serious is the OBDII code P1A8B GMC (Volt Inverter Temperature High)?
- This code should be taken seriously as it can lead to further damage to the vehicle's components if not addressed promptly.
4. Can I continue driving my vehicle with OBDII code P1A8B GMC?
- It is not recommended to drive your vehicle with this code active, as it can result in further damage and potential safety hazards.
5. What should I do if I encounter OBDII code P1A8B GMC?
- It is advisable to have your vehicle inspected by a qualified mechanic to diagnose the issue accurately and perform necessary repairs.
6. How can I prevent OBDII code P1A8B GMC from occurring?
- Regular maintenance checks, including monitoring the cooling system and temperature sensors, can help prevent this code from appearing.
7. Is it possible to reset OBDII code P1A8B GMC on my own?
- While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.
8. How much does it typically cost to repair OBDII code P1A8B GMC?
- The cost of repairs can vary depending on the specific cause of the code, but it is recommended to budget for diagnostic fees, parts, and labor.
9. Can extreme weather conditions contribute to triggering OBDII code P1A8B GMC?
- Yes, extreme temperatures can put additional strain on the inverter cooling system, potentially leading to the code being triggered.
10. Are there any DIY repair tips for OBDII code P1A8B GMC?
- While some basic troubleshooting like checking coolant levels and ensuring proper airflow can be done, complex repairs should be left to professional mechanics to avoid further damage.
Discuss the causes and fixes for P1A8B GMC OBDII Code
Code P1A8B GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
