P1A88 Code - 42 Volt System Performance
Quick Answer
The Accessory DC Power Control Module (APM) supplies the energy that flows between the high voltage, 300 volt, Direct Current (DC) and intermediate voltage, 42 volt, DC to support the Electric Power Steering (EPS). Common causes include Faulty Accessory DC Power Control Module (APM), Accessory DC Power Control Module (APM) harness is open or shorted, Accessory DC Power Control Module (APM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1A88 indicates 42 Volt System Performance.
- Common causes
- Common causes include Faulty Accessory DC Power Control Module (APM), Accessory DC Power Control Module (APM) harness is open or shorted, Accessory DC Power Control Module (APM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1A88 Description
The APM continuously monitors the status of its 42 volt circuitry. It will do some diagnostics on this circuitry when the ignition key is first turned to RUN. Additional diagnostics are run while the APM is doing 42 volt conversions after receiving the 42 volt enable command.
What are the Possible Causes of the DTC P1A88?
- Faulty Accessory DC Power Control Module (APM)
- Accessory DC Power Control Module (APM) harness is open or shorted
- Accessory DC Power Control Module (APM) circuit poor electrical connection
How to Fix the DTC P1A88?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1A88 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1A88 code?
Need more information on how to fix the P1A88 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1A88 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1A88 Buick — 42 Volt System Performance
- P1A88 Cadillac — 42 Volt System Performance
- P1A88 Chevrolet — 42 Volt System Performance
- P1A88 GMC — 42 Volt System Performance
- P1A88 Saturn — 42 Volt System Performance
Frequently Asked Questions about P1A88 Code
1. What are common symptoms of OBDII code P1A88 (42 Volt System Performance)?
- Common symptoms include poor vehicle performance, reduced fuel efficiency, and potential warning lights on the dashboard.
2. What are some possible causes of OBDII code P1A88?
- Causes can include a faulty 42-volt battery, issues with the 42-volt charging system, damaged wiring, or a malfunctioning control module.
3. How can I diagnose OBDII code P1A88?
- Proper diagnosis typically involves using a professional OBDII scanner to retrieve the code, inspecting the 42-volt system components, and testing the battery and charging system.
4. Can I still drive my vehicle with OBDII code P1A88?
- It is not recommended to drive the vehicle with this code present as it can lead to further damage and potential safety issues. Seek professional assistance to address the problem promptly.
5. Is it safe to ignore OBDII code P1A88?
- Ignoring this code can result in more severe issues and potential breakdowns. It's best to address the underlying problem to ensure the vehicle's reliability and safety.
6. How can I reset OBDII code P1A88?
- Resetting the code can be done using an OBDII scanner. However, it is vital to diagnose and fix the root cause of the code before resetting it to prevent it from returning.
7. Can I repair OBDII code P1A88 myself?
- Repairing this code may require advanced automotive knowledge and specialized tools. It is recommended to seek professional help to properly diagnose and repair the underlying issue.
8. What are some common repair tips for OBDII code P1A88?
- Repair tips may include checking and replacing the 42-volt battery, inspecting the charging system components, testing the wiring for faults, and ensuring proper connections.
9. How much does it typically cost to fix OBDII code P1A88?
- The cost of fixing this code can vary depending on the underlying issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from reputable automotive shops.
10. How often does OBDII code P1A88 occur in vehicles?
- OBDII code P1A88 related to the 42-volt system performance is relatively uncommon compared to other diagnostic trouble codes, but it can still occur in vehicles equipped with a 42-volt system.
Discuss the causes and fixes for P1A88 OBDII Code
Code P1A88 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
