P1A6D GMC Code - Starter/Generator Control Module System Voltage Low
Quick Answer
The Starter/Generator Control Module (SGCM) monitors the system voltage sensor to detect a shorted low or high condition. Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1A6D GMC indicates Starter/Generator Control Module System Voltage Low.
- Common causes
- Common causes include Faulty Starter/Generator Control Module (SGCM), Starter/Generator Control Module (SGCM) harness is open or shorted, Starter/Generator Control Module (SGCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1A6D GMC Description
What are the Possible Causes of the DTC P1A6D GMC?
- Faulty Starter/Generator Control Module (SGCM)
- Starter/Generator Control Module (SGCM) harness is open or shorted
- Starter/Generator Control Module (SGCM) circuit poor electrical connection
How to Fix the DTC P1A6D GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1A6D GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1A6D GMC code?
Need more information on how to fix the P1A6D GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1A6D GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1A6D GMC Code
1. What are the common symptoms of OBDII code P1A6D GMC (Starter/Generator Control Module System Voltage Low)?
- Common symptoms include difficulty starting the vehicle, reduced engine power, illuminated warning lights on the dashboard, and possible stalling of the engine.
2. What are the possible causes of OBDII code P1A6D GMC?
- The code P1A6D GMC can be triggered by issues such as a faulty starter/generator control module, poor electrical connections, a weak battery, or a failing alternator.
3. How can I diagnose the cause of OBDII code P1A6D GMC?
- Diagnosing the code may involve checking the battery voltage, inspecting the starter/generator control module for any signs of damage, and testing the alternator output using a multimeter.
4. What are the recommended repair tips for addressing OBDII code P1A6D GMC?
- Repair tips may include replacing the starter/generator control module if it is found to be faulty, ensuring all electrical connections are secure, testing and, if necessary, replacing the battery, and inspecting the alternator for proper functioning.
5. Can I continue to drive my vehicle with OBDII code P1A6D GMC present?
- It is not advisable to continue driving the vehicle with this code present, as it can lead to further damage to the electrical system and potential stalling of the engine while driving.
6. How much does it typically cost to repair OBDII code P1A6D GMC?
- The cost of repairing OBDII code P1A6D GMC can vary depending on the underlying cause, but it may range from a few hundred to over a thousand dollars, including parts and labor.
7. Will resetting the OBDII code P1A6D GMC make it go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to return once the vehicle is driven and the onboard diagnostics detect the problem again.
8. Is it possible to prevent OBDII code P1A6D GMC from occurring in the future?
- Regular maintenance of the vehicle's electrical system, including checking the battery, alternator, and starter/generator control module, can help prevent the recurrence of this code in the future.
9. Can a DIY enthusiast without much automotive experience fix OBDII code P1A6D GMC?
- While some simple checks like inspecting electrical connections can be done by a DIY enthusiast, diagnosing and repairing the root cause of this code may require more advanced automotive knowledge and tools, so it is best handled by a professional mechanic.
10. How urgent is it to address OBDII code P1A6D GMC once it appears?
- It is important to address OBDII code P1A6D GMC promptly to prevent potential damage to the vehicle's electrical system and ensure the safety and reliability of the vehicle.
Discuss the causes and fixes for P1A6D GMC OBDII Code
Code P1A6D GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
