P1A68 GMC Code - Starter/Generator Control Module Programming Read Only Memory
Quick Answer
The purpose of the Accessory Power Module (APM), integral to the Starter/Generator Control Module (SGCM), is to control the amount and direction of energy flowing between the 42 V DC and 14 V DC buses via the APM, bi-directional 42 V DC to 14 V DC converter. Common causes include Faulty, harness is open or shorted, circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1A68 GMC indicates Starter/Generator Control Module Programming Read Only Memory.
- Common causes
- Common causes include Faulty, harness is open or shorted, circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1A68 GMC Description
When the APM Power Conversion direction is set to a value of 42 V to 14 V, the energy will flow from the 42 V DC Bus to the 14 V DC Bus via the APM. When the Service Charge or jump starting is requested, the energy will flow from the 14 V DC Bus to the 42 V DC Bus via the APM. When the APM Power Conversion direction is set to a value of Off, the APM will be turned off, and not consume or transfer any power. When the APM Power Conversion direction is set to a value of Invalid, the energy will flow from the 42 V DC Bus to the 14 V DC Bus via the APM.
What are the Possible Causes of the DTC P1A68 GMC?
- Faulty
- harness is open or shorted
- circuit poor electrical connection
How to Fix the DTC P1A68 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1A68 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1A68 GMC code?
Need more information on how to fix the P1A68 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1A68 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1A68 GMC Code
1. What are the common symptoms of OBDII code P1A68 GMC related to the Starter/Generator Control Module Programming Read Only Memory?
- Common symptoms include issues with starting the vehicle, poor acceleration, reduced fuel efficiency, and potential stalling.
2. What could cause the OBDII code P1A68 GMC to trigger in relation to the Starter/Generator Control Module Programming Read Only Memory?
- The code can be triggered by programming errors in the Starter/Generator Control Module, faulty wiring connections, or a defective control module.
3. How do I diagnose the OBDII code P1A68 GMC for the Starter/Generator Control Module Programming Read Only Memory issue?
- Diagnosis involves using a scan tool to retrieve the code, checking for any other related codes, and inspecting the wiring and connections to the control module.
4. Can I continue driving my vehicle with the OBDII code P1A68 GMC related to the Starter/Generator Control Module Programming Read Only Memory?
- It is not recommended to drive the vehicle with this code present, as it can lead to potential performance issues and further damage if left unresolved.
5. What are the possible repair options for addressing the OBDII code P1A68 GMC for the Starter/Generator Control Module issue?
- Repair options may include reprogramming the control module, checking and repairing any wiring issues, or replacing the control module if necessary.
6. Are there any DIY tips for troubleshooting the OBDII code P1A68 GMC for the Starter/Generator Control Module problem?
- DIY tips include ensuring all connections are secure, checking for any visible wiring damage, and consulting the vehicle's service manual for specific diagnostic procedures.
7. How critical is it to address the OBDII code P1A68 GMC associated with the Starter/Generator Control Module Programming Read Only Memory?
- It is important to address the code promptly to prevent potential performance issues, further damage to the vehicle, and ensure safe operation.
8. Can the OBDII code P1A68 GMC related to the Starter/Generator Control Module issue be reset without addressing the underlying problem?
- While the code can be cleared with a scan tool, it is crucial to address the underlying issue to prevent the code from reappearing and causing further issues.
9. Is it recommended to seek professional help for resolving the OBDII code P1A68 GMC for the Starter/Generator Control Module issue?
- Due to the complexity of control module programming and electrical systems, it is advisable to seek professional help from a qualified mechanic or technician for accurate diagnosis and repair.
10. How can proper maintenance help prevent the occurrence of the OBDII code P1A68 GMC related to the Starter/Generator Control Module issue?
- Regular maintenance, including checking for loose connections, keeping the control module software up to date, and addressing any warning signs promptly, can help prevent the code from appearing.
Discuss the causes and fixes for P1A68 GMC OBDII Code
Code P1A68 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
