AutoCodes – Buick – P1A4F Buick

P1A4F Buick Code - Drive Motor 1 Control Module Not Programmed

Quick Answer

The drive motor control modules are internal to the Power Inverter Module, often referred to as the drive motor-generator Power Inverter Module, and are not serviced separately. Common causes include Faulty Power Inverter Module (PIM), Power Inverter Module (PIM) harness is open or shorted, Power Inverter Module (PIM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1A4F Buick indicates Drive Motor 1 Control Module Not Programmed.
Common causes
Common causes include Faulty Power Inverter Module (PIM), Power Inverter Module (PIM) harness is open or shorted, Power Inverter Module (PIM) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 835
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 03, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1A4F Buick Description

The drive motor control modules are internal to the Power Inverter Module, often referred to as the drive motor-generator Power Inverter Module, and are not serviced separately. This fault is handled inside the drive motor control modules and no external circuits are involved. The Diagnostic Trouble Code (DTC) will set when the Power Inverter Module has detected an internal malfunction, or a service module has been installed but not yet programmed.
OBDII Code P1A4F Buick - Drive Motor 1 Control Module Not Programmed - AutoCodes.com
P1A4F Buick Code - Drive Motor 1 Control Module Not Programmed

What are the Possible Causes of the DTC P1A4F Buick?

  • Faulty Power Inverter Module (PIM)
  • Power Inverter Module (PIM) harness is open or shorted
  • Power Inverter Module (PIM) circuit poor electrical connection

How to Fix the DTC P1A4F Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1A4F Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1A4F Buick code?

Need more information on how to fix the P1A4F Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1A4F Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1A4F Buick Code

1. What does the OBDII code P1A4F mean for a Buick?

The P1A4F code indicates that the Drive Motor 1 Control Module has not been properly programmed or calibrated.

2. What are common symptoms of the P1A4F code in a Buick?

Symptoms may include illumination of the check engine light, reduced vehicle performance, or issues with the hybrid or electric drive system if equipped.

3. What causes the P1A4F code to appear?

The most common causes are a failure to program the Drive Motor 1 Control Module after replacement or a software issue in the module.

4. Can the P1A4F code affect drivability?

Yes, depending on the severity, this code may lead to reduced power, limited acceleration, or diminished hybrid/electric functionality.

5. How is the P1A4F code diagnosed?

A technician will use a scan tool to confirm the code, check the programming status of the control module, and inspect for any software or communication issues.

6. Can I drive my Buick with the P1A4F code?

Driving with this code is not recommended, as it may result in reduced performance and could potentially damage other components over time.

7. How is the P1A4F code fixed?

The Drive Motor 1 Control Module needs to be properly programmed, typically using a GM-approved scan tool and updated software.

8. Do I need to replace the Drive Motor 1 Control Module to fix P1A4F?

Not necessarily. This code often occurs due to improper programming, so replacement is usually not required unless the module is defective.

9. How much does it cost to fix the P1A4F code?

The cost varies but typically includes labor for reprogramming the module, which can range from $100 to $300, depending on the dealership or repair shop.

10. Can I fix the P1A4F code myself?

Unless you have access to professional-grade programming tools and software, fixing this code is best left to a certified technician or dealership.

Discuss the causes and fixes for P1A4F Buick OBDII Code

Code P1A4F Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play