P1A4A GMC - Hybrid Battery Current Sensor Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Hybrid Battery Current Sensor
  • Hybrid Battery Current Sensor harness is open or shorted
  • Hybrid Battery Current Sensor circuit poor electrical connection

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1a4a Gmc Description

The closed loop principle makes use of a zero-field detector signal which is processed to drive a current through a compensation coil in such a way, that it balances out the magnetic field of the applied current at any time. Thus the compensation current is proportional to the current to be measured. In contrast to common Hall-detectors the patented soft magnetic VAC-probe made from a small strip of amorphous metal VITROVAC(tm) is strictly symmetric with respect to the magnetic field. Therefore it generates no offset contribution to the sensor. Moreover, the symmetry is neither affected by temperature changes or any aging effects. This enables for very high accuracy, nearly zero offset, and excellent stability over temperature and time.

In current sensors based on the closed loop principle the primary current conductor is lead through a magnetic core. The magnetic field of the primary current is concentrated in the magnetic core is detected by a soft-magnetic field probe in an air gap of the core. By means of a current through an additional winding on the core, the magnetic flux of the primary current is compensated. The magnetic flux in the core is held at zero value. The compensation current is proportional, and is an image of the primary current.

The current sensors are based on the closed-loop principle. A soft-magnetic probe is used as field detector of the primary current magnetic field. Compared to standard sensors with Hall-probes, the magnetic probe offers the following application advantages:

- Low offset currents

- Small temperature dependence

- No long term drift of offset current

- Small offset current forces

- Compact size

- Separate electronics available

OBDII Code P1a4a Gmc - Hybrid Battery Current Sensor Performance - AutoCodes.com

Need more help?

Get the P1a4a Gmc code diagnosed by a professional: Find a repair shop in your area

Related Information

P1A4A GMC Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1a4a Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧