P1A07 CHEVROLET - Battery Energy Control Module 5 V Reference Circuit
P1a07 Chevrolet DescriptionThe drive motor battery contains 288 cells. Groups of three cells are welded together in parallel. There are a total of 96 cell groups in the drive motor battery assembly. These cell groups are electrically connected in-series. Each individual cell group is rated at 3.7 volts, for a nominal system voltage of 355 volts direct current. The battery cells are also grouped together into three sections. The first 90 cells/30 cell groups make up battery section one. This section is adjacent to the cowl and contains batteries 67 through to 96. Battery section two is located behind section one. It is made up of 72 cells/24 cell groups and contains batteries 43 through to 66. The transverse battery section is section number three, it is made up of the remaining 126 cells/42 cell groups and contains batteries 1 through to 42. The three battery sections are individually serviceable components.
The battery energy control module monitors the voltage of the 96 cell groups. Voltage sense lines are attached to each individual cell group, and these sense lines terminate at a connector located on the top surface of the battery section. A serviceable voltage sense harness joins this connector to a drive motor battery high-voltage interface control module, also located on the top surface of the battery section. The drive motor battery high-voltage interface control module encodes the voltage reading and transmits it to the battery energy control module through the battery control harness. There is one drive motor battery high-voltage interface control module located on battery sections one and two, and two drive motor battery high-voltage interface control modules associated with battery section three. The drive motor battery high-voltage interface control module, voltage sense harnesses, battery control harness and battery energy control module are all considered serviceable components.
The battery energy control module will determine when a fault condition is present. Diagnostics and system status are communicated from the battery energy control module to hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic trouble code information.
Need more help?Get the P1a07 Chevrolet code diagnosed by a professional: Find a repair shop in you area
P1A07 CHEVROLET CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1a07 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks