P1952 Code - Turbocharger Control Module 1 Defective
Quick Answer
P1952 indicates Turbocharger Control Module 1 Defective. Common causes include Faulty Turbocharger Control Module 1, Turbocharger Control Module 1 harness is open or shorted, Turbocharger Control Module 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1952 indicates Turbocharger Control Module 1 Defective.
- Common causes
- Common causes include Faulty Turbocharger Control Module 1, Turbocharger Control Module 1 harness is open or shorted, Turbocharger Control Module 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1952 Description
What are the Possible Causes of the DTC P1952?
- Faulty Turbocharger Control Module 1
- Turbocharger Control Module 1 harness is open or shorted
- Turbocharger Control Module 1 circuit poor electrical connection
- Faulty Turbocharger
How to Fix the DTC P1952?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1952 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1952 code?
Need more information on how to fix the P1952 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1952 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1952 Audi — Turbocharger Control Module 1 Defective
- P1952 Volkswagen — Turbocharger Control Module 1 Defective
Frequently Asked Questions about P1952 Code
1. What are common symptoms of OBDII code P1952 (Turbocharger Control Module 1 Defective)?
- Common symptoms may include reduced engine power, hesitation during acceleration, and the illumination of the check engine light.
2. What causes OBDII code P1952 to trigger?
- This code is typically triggered by a malfunction in the turbocharger control module 1, which may be due to wiring issues, a faulty control module, or sensor malfunctions.
3. How can I diagnose the cause of OBDII code P1952?
- Diagnosing the cause of P1952 may involve checking the wiring connections to the turbocharger control module, testing the control module itself, and inspecting related sensors for proper function.
4. Can driving with OBDII code P1952 cause further damage to the vehicle?
- Continuing to drive with this code may result in reduced engine performance and potential damage to the turbocharger system, so it is recommended to address the issue promptly.
5. Are there any safety concerns associated with OBDII code P1952?
- While OBDII code P1952 itself may not pose immediate safety risks, the symptoms it causes, such as loss of power or acceleration issues, can impact the vehicle's drivability and safety.
6. Is it possible to reset OBDII code P1952 without repairing the issue?
- Resetting the code without addressing the underlying problem will only temporarily clear the check engine light, but the code is likely to reappear once the issue persists.
7. How can I repair OBDII code P1952 (Turbocharger Control Module 1 Defective)?
- Repairing this code may involve replacing the faulty turbocharger control module, repairing or replacing damaged wiring, or addressing any sensor malfunctions causing the issue.
8. Can a DIY enthusiast fix OBDII code P1952 at home?
- While some basic diagnostics like checking wiring connections can be performed at home, diagnosing and repairing the turbocharger control module or related components may require professional expertise and specialized tools.
9. How much does it typically cost to repair OBDII code P1952?
- The cost of repairing this code can vary depending on the root cause of the issue, the extent of repairs needed, and labor rates, but it may range from a few hundred to over a thousand dollars.
10. Will OBDII code P1952 affect the vehicle's emissions and fuel efficiency?
- Yes, a malfunctioning turbocharger control module can impact emissions and fuel efficiency by causing the engine to run inefficiently or in a reduced power state.
Discuss the causes and fixes for P1952 OBDII Code
Code P1952 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
