AutoCodes – Volkswagen – P1912 Volkswagen

P1912 Volkswagen Code - Brake Servo Pressure Sensor Open Circuit/Short To Positive

Quick Answer

P1912 Volkswagen indicates Brake Servo Pressure Sensor Open Circuit/Short To Positive. Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1912 Volkswagen indicates Brake Servo Pressure Sensor Open Circuit/Short To Positive.
Common causes
Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 10,860
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 27, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1912 Volkswagen Description

OBDII Code P1912 Volkswagen - Brake Servo Pressure Sensor Open Circuit/Short To Positive - AutoCodes.com
P1912 Volkswagen Code - Brake Servo Pressure Sensor Open Circuit/Short To Positive

What are the Possible Causes of the DTC P1912 Volkswagen?

  • Faulty Brake Servo Pressure Sensor
  • Brake Servo Pressure Sensor harness is open or shorted
  • Brake Servo Pressure Sensor circuit poor electrical connection

How to Fix the DTC P1912 Volkswagen?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1912 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1912 Volkswagen code?

Need more information on how to fix the P1912 Volkswagen code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1912 Volkswagen code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1912 Volkswagen Code

1. What does the OBDII code P1912 mean on a Volkswagen?

P1912 indicates an issue with the Brake Servo Pressure Sensor, specifically an open circuit or a short to positive in the sensor's electrical circuit.

2. What are the common symptoms of the P1912 code?

Symptoms may include illuminated warning lights (ABS, brake, or check engine), reduced braking performance, loss of brake assist, or erratic brake pedal behavior.

3. What causes the P1912 code to appear?

Common causes include a faulty brake servo pressure sensor, damaged wiring or connectors, a short circuit, or a malfunction in the vehicle's electronic control unit (ECU).

4. Can I drive with the P1912 code active?

Driving with this code is not recommended, as it may affect braking performance, increasing the risk of an accident.

5. How do I diagnose the P1912 code?

Use an OBDII scanner to confirm the code, then inspect the brake servo pressure sensor, wiring, and connectors for damage or disconnection. A multimeter can be used to check for electrical continuity.

6. How do I fix the P1912 code on a Volkswagen?

Repairs may include replacing the brake servo pressure sensor, repairing or replacing damaged wiring or connectors, and clearing the code with an OBDII scanner.

7. How much does it cost to repair a P1912 code?

Repair costs vary depending on the issue. Replacing the brake servo pressure sensor typically costs $150-$300, plus labor costs if done at a repair shop.

8. Can a dirty sensor cause the P1912 code?

While dirt or debris can interfere with sensor function, this code specifically points to an electrical issue, such as an open circuit or short.

9. Does the P1912 code affect other vehicle systems?

Yes, it can impact the ABS and stability control systems, as they rely on accurate brake pressure readings for proper operation.

10. How can I prevent the P1912 code from recurring?

Regularly inspect and maintain the brake system, including wiring and connectors, and promptly address any signs of wear or damage.

Discuss the causes and fixes for P1912 Volkswagen OBDII Code

Code P1912 Volkswagen comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play