P1901 2006 Ford Fusion Code - Turbine Shaft Speed Sensor Circuit Intermittent
Quick Answer
The Turbine Shaft Speed (TSS) sensor is a Hall-effect pickup that sends a signal to the Powertrain Control Module (PCM) or Transmission Control Module (TCM) that indicates transaxle turbine shaft input speed. Common causes include Turbine Shaft Speed (TSS) sensor not installed correctly, Faulty Turbine Shaft Speed sensor, Turbine Shaft Speed sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1901 2006 Ford Fusion indicates Turbine Shaft Speed Sensor Circuit Intermittent.
- Common causes
- Common causes include Turbine Shaft Speed (TSS) sensor not installed correctly, Faulty Turbine Shaft Speed sensor, Turbine Shaft Speed sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1901 2006 Ford Fusion Description
What are the Possible Causes of the DTC P1901 2006 Ford Fusion?
- Turbine Shaft Speed (TSS) sensor not installed correctly
- Faulty Turbine Shaft Speed sensor
- Turbine Shaft Speed sensor harness is open or shorted
- Turbine Shaft Speed sensor circuit poor electrical connection
How to Fix the DTC P1901 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1901 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1901 2006 Ford Fusion code?
Need more information on how to fix the P1901 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1901 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1901 2006 Ford Fusion Code
1. What are common symptoms of OBDII code P1901 for a 2006 Ford Fusion related to the Turbine Shaft Speed Sensor Circuit Intermittent issue?
- Common symptoms include erratic shifting, hesitation during acceleration, and the transmission slipping or failing to engage properly.
2. What are the possible causes of OBDII code P1901 on a 2006 Ford Fusion indicating a Turbine Shaft Speed Sensor Circuit Intermittent problem?
- Potential causes include a faulty turbine shaft speed sensor, damaged wiring or connectors in the circuit, or issues with the transmission control module.
3. How can I diagnose the OBDII code P1901 on my 2006 Ford Fusion related to the Turbine Shaft Speed Sensor Circuit Intermittent issue?
- To diagnose the problem, you can use an OBDII scanner to read the code, inspect the wiring and connectors for damage, and test the turbine shaft speed sensor for proper function.
4. Is it safe to continue driving my 2006 Ford Fusion with OBDII code P1901 indicating a Turbine Shaft Speed Sensor Circuit Intermittent problem?
- It is not recommended to continue driving the vehicle with this issue, as it can lead to further damage to the transmission and potentially unsafe driving conditions.
5. How can I repair OBDII code P1901 on my 2006 Ford Fusion related to the Turbine Shaft Speed Sensor Circuit Intermittent issue?
- Repair options may include replacing the turbine shaft speed sensor, repairing or replacing damaged wiring or connectors, or reprogramming the transmission control module.
6. Can a DIY enthusiast fix OBDII code P1901 on a 2006 Ford Fusion by themselves?
- While some experienced DIY enthusiasts may be able to address the issue, it is recommended to consult a professional mechanic for proper diagnosis and repair due to the complexity of transmission-related problems.
7. Are there any preventive maintenance tips to avoid OBDII code P1901 on a 2006 Ford Fusion Turbine Shaft Speed Sensor Circuit Intermittent issue?
- Regularly inspecting the transmission system, performing routine maintenance, and addressing any warning signs promptly can help prevent issues leading to this OBDII code.
8. Will resetting the OBDII code P1901 on my 2006 Ford Fusion clear the Turbine Shaft Speed Sensor Circuit Intermittent problem?
- Simply clearing the code without addressing the underlying cause will not fix the issue. It is essential to diagnose and repair the root cause of the problem to prevent the code from reappearing.
9. Can weather conditions or driving habits contribute to triggering OBDII code P1901 on a 2006 Ford Fusion for the Turbine Shaft Speed Sensor Circuit Intermittent?
- While extreme weather conditions or harsh driving habits can potentially impact the transmission system, the OBDII code P1901 typically indicates a specific electrical or sensor-related issue.
10. How much can I expect to pay for repairing OBDII code P1901 on a 2006 Ford Fusion related to the Turbine Shaft Speed Sensor Circuit Intermittent problem?
- Repair costs can vary depending on the exact cause of the issue, but typically, expenses for parts and labor can range from a few hundred to over a thousand dollars.
Discuss the causes and fixes for P1901 2006 Ford Fusion OBDII Code
Code P1901 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
