P1898 Acura Code - CVT Drive Pulley Pressure Control Valve Stuck ON or OFF
Quick Answer
The Continuously Variable Transmission (CVT) drive pulley pressure control solenoid valve and the CVT driven pulley pressure control solenoid valve control hydraulic pressure. Common causes include CVT Drive Pulley Pressure Control Valve Stuck ON or OFF, Faulty CVT Drive Pulley Pressure Control Valve, CVT Drive Pulley Pressure Control Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1898 Acura indicates CVT Drive Pulley Pressure Control Valve Stuck ON or OFF.
- Common causes
- Common causes include CVT Drive Pulley Pressure Control Valve Stuck ON or OFF, Faulty CVT Drive Pulley Pressure Control Valve, CVT Drive Pulley Pressure Control Valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1898 Acura Description
What are the Possible Causes of the DTC P1898 Acura?
- CVT Drive Pulley Pressure Control Valve Stuck ON or OFF
- Faulty CVT Drive Pulley Pressure Control Valve
- CVT Drive Pulley Pressure Control Valve harness is open or shorted
- CVT Drive Pulley Pressure Control Valve circuit poor electrical connection
How to Fix the DTC P1898 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1898 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1898 Acura code?
Need more information on how to fix the P1898 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1898 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1898 Acura Code
1. What does the OBDII code P1898 mean on an Acura?
P1898 indicates that the CVT Drive Pulley Pressure Control Valve is stuck in either the ON or OFF position, potentially affecting the transmission's performance.
2. What are the common symptoms of code P1898 in an Acura?
Symptoms may include poor acceleration, transmission slipping, harsh shifting, unusual noises from the transmission, or the transmission staying in a single gear.
3. What causes the P1898 code to appear?
Common causes include a malfunctioning CVT drive pulley pressure control solenoid, transmission fluid contamination, internal transmission damage, or electrical issues like damaged wiring or connectors.
4. How does a stuck CVT Drive Pulley Pressure Control Valve affect the transmission?
A stuck valve can disrupt the hydraulic pressure needed to adjust the transmission pulleys, leading to erratic or impaired shifting and reduced performance.
5. Can dirty or old transmission fluid trigger the P1898 code?
Yes, contaminated or degraded transmission fluid can cause the control valve to stick, leading to this code.
6. Is it safe to drive with the P1898 code active?
Driving with this code can lead to further transmission damage and reduced performance. It’s best to address the issue promptly.
7. How is the P1898 code diagnosed?
A technician will typically use a scan tool to confirm the code, inspect the CVT solenoid and related components, check for wiring issues, and assess the condition of the transmission fluid.
8. What repairs are commonly needed to fix the P1898 code?
Repairs may involve cleaning or replacing the CVT drive pulley pressure control solenoid, flushing and replacing the transmission fluid, repairing damaged wiring, or addressing internal transmission issues.
9. Can resetting the code fix the P1898 issue in an Acura?
Resetting the code may clear it temporarily, but the underlying issue must be resolved to prevent the code from returning.
10. How much does it cost to repair a P1898 code on an Acura?
The cost depends on the root cause, ranging from $100-$250 for a solenoid replacement to several thousand dollars for major transmission repairs.
Discuss the causes and fixes for P1898 Acura OBDII Code
Code P1898 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
