P185F Buick Code - Transfer Case Shift Pending Signal Not Plausible
Quick Answer
The Engine Control Module (ECM) uses the following two ways to determine if the transfer case is in 4WD Low, 4WD High, or Neutral. Common causes include Reprogram Engine Control Module (ECM), Faulty Engine Control Module, Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P185F Buick indicates Transfer Case Shift Pending Signal Not Plausible.
- Common causes
- Common causes include Reprogram Engine Control Module (ECM), Faulty Engine Control Module, Engine Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P185F Buick Description
1. The first way is to compare the transmission output speed sensor to the transfer case output speed sensor in order to calculate the transfer case range.
2. The second way is to use a LAN message sent by the transfer case shift control module to the ECM.
The ECM uses this message to determine motor torque required and transmission shifting.
The internal fault detection is handled inside the control module. No external circuit diagnosis is involved.
If the first way and second way of determining transfer case range do not match while in 4WD Low, 4WD High or Neutral, then the Diagnostic Trouble Code (DTC) is set.
What are the Possible Causes of the DTC P185F Buick?
- Reprogram Engine Control Module (ECM)
- Faulty Engine Control Module
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
- Transmission internal mechanical problems
How to Fix the DTC P185F Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P185F Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P185F Buick code?
Need more information on how to fix the P185F Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P185F Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P185F Buick Code
1. What are the common symptoms of OBDII code P185F in a Buick related to the Transfer Case Shift Pending Signal Not Plausible?
- Common symptoms include difficulty shifting gears, the transfer case not engaging properly, and an illuminated warning light on the dashboard.
2. What are the possible causes of OBDII code P185F Buick related to the Transfer Case Shift Pending Signal Not Plausible?
- Possible causes include a faulty transfer case control module, wiring issues, a defective shift motor, or a malfunctioning transfer case actuator.
3. How can I diagnose OBDII code P185F in my Buick?
- Diagnose the code by performing a thorough inspection of the transfer case components, checking the wiring connections, and using a diagnostic scanner to read the trouble codes.
4. What are some repair tips for fixing OBDII code P185F Buick related to the Transfer Case Shift Pending Signal Not Plausible?
- Repair tips include checking and repairing any damaged wiring, replacing a faulty transfer case control module, inspecting the transfer case actuator, and ensuring all connections are secure.
5. Can I drive my Buick with OBDII code P185F present?
- It is not recommended to drive your Buick with OBDII code P185F present, as it can lead to further damage to the transfer case components and affect the vehicle's drivability.
6. How much does it cost to repair OBDII code P185F Buick related to the Transfer Case Shift Pending Signal Not Plausible?
- The cost of repairing OBDII code P185F can vary depending on the underlying issue, but it may range from $200 to $800, including parts and labor.
7. Can I reset OBDII code P185F in my Buick without fixing the underlying issue?
- While you can clear the code temporarily, it is not recommended to reset OBDII code P185F without addressing the underlying problem, as it will likely reoccur.
8. Is OBDII code P185F Buick related to the Transfer Case Shift Pending Signal Not Plausible a common issue?
- While not extremely common, OBDII code P185F can occur in Buick vehicles with transfer case shift issues, especially in older models or vehicles that have experienced rough terrain.
9. How long does it take to repair OBDII code P185F in a Buick?
- The repair time for OBDII code P185F can vary depending on the complexity of the issue, but it may take a few hours to a full day for a mechanic to diagnose and fix the problem.
10. Can I prevent OBDII code P185F from occurring in my Buick?
- To prevent OBDII code P185F, it is essential to perform regular maintenance on your transfer case components, address any warning signs promptly, and drive carefully to avoid putting strain on the system.
Discuss the causes and fixes for P185F Buick OBDII Code
Code P185F Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
