P185C Code - Engagement Too Late With Clutch 2
Quick Answer
The Transmission Control Module (TCM) monitors the Clutch. Common causes include Transmission mechanical problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P185C indicates Engagement Too Late With Clutch 2.
- Common causes
- Common causes include Transmission mechanical problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P185C Description
What are the Possible Causes of the DTC P185C?
- Transmission mechanical problems
How to Fix the DTC P185C?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P185C code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P185C code?
Need more information on how to fix the P185C code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P185C code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P185C Mitsubishi — Engagement Too Late With Clutch 2
Frequently Asked Questions about P185C Code
1. What does the OBDII code P185C mean?
P185C indicates an issue where Clutch 2 in the transmission is engaging too late, potentially affecting gear shifting and overall drivetrain performance.
2. What are the common symptoms of code P185C?
Symptoms may include delayed or rough gear shifts, transmission slippage, reduced acceleration, or the vehicle entering limp mode.
3. What causes the P185C code to appear?
Common causes include low or contaminated transmission fluid, a faulty clutch actuator, worn clutch components, or issues with the transmission control module (TCM).
4. Can driving with a P185C code damage my vehicle?
Yes, continuing to drive with this code can cause further damage to the transmission and clutch system, leading to more expensive repairs.
5. How do I diagnose the P185C code?
Diagnosis typically involves checking the transmission fluid level and condition, inspecting the clutch actuator and wiring, and scanning the TCM for additional codes or faults.
6. Is P185C specific to certain vehicles?
Yes, the P185C code is more common in vehicles with dual-clutch or automated manual transmissions, but its specifics can vary by manufacturer.
7. How can I fix the P185C code?
Repairs may include replacing the clutch actuator, repairing wiring connections, servicing the transmission fluid, or recalibrating the TCM.
8. Can low transmission fluid cause the P185C code?
Yes, low or degraded transmission fluid can prevent proper clutch engagement, triggering the P185C code.
9. How much does it cost to fix the P185C code?
Repair costs vary depending on the issue but can range from $150 for fluid service to over $1,000 for clutch repairs or actuator replacement.
10. Do I need to reset the P185C code after repairs?
Yes, after repairs, the code should be cleared using an OBDII scanner, and a test drive should confirm the issue is resolved.
Discuss the causes and fixes for P185C OBDII Code
-
-
You probably have a transmission mechanical problem. I can provide more information if you share your vehicle's make, model, and year.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
