P1825 Buick Code - Internal Mode Switch Invalid Range
Quick Answer
The manual shift detent lever with shaft position switch assembly, or Internal Mode Switch (IMS) assembly is a sliding contact switch attached to the control valve body within the transmission. Common causes include Faulty Internal Mode Switch, Internal Mode Switch harness is open or shorted, Internal Mode Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1825 Buick indicates Internal Mode Switch Invalid Range.
- Common causes
- Common causes include Faulty Internal Mode Switch, Internal Mode Switch harness is open or shorted, Internal Mode Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1825 Buick Description
What are the Possible Causes of the DTC P1825 Buick?
- Faulty Internal Mode Switch
- Internal Mode Switch harness is open or shorted
- Internal Mode Switch circuit poor electrical connection
How to Fix the DTC P1825 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1825 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1825 Buick code?
Need more information on how to fix the P1825 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1825 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1825 Buick Code
1. What does the OBDII code P1825 mean on a Buick?
P1825 indicates that the Internal Mode Switch (IMS) has detected an invalid range or position, which means the transmission control system is receiving inconsistent signals.
2. What are the common symptoms of code P1825 on a Buick?
Common symptoms include the transmission being stuck in one gear, erratic shifting, the vehicle going into limp mode, and the illumination of the check engine light.
3. What causes the P1825 code to appear on a Buick?
This code can be triggered by a faulty Internal Mode Switch, damaged or corroded wiring or connectors, misaligned shift linkage, or a malfunctioning Transmission Control Module (TCM).
4. Can I drive my Buick with the P1825 code?
Driving with the P1825 code is not recommended, as it may cause further damage to the transmission or create unsafe driving conditions due to gear shifting issues.
5. How do you diagnose the P1825 code on a Buick?
Diagnosis involves checking the IMS for proper operation, inspecting the wiring and connectors for damage, using a scan tool to monitor data, and verifying that the shift linkage is properly aligned.
6. How do you fix the P1825 code on a Buick?
Repairs may include replacing the Internal Mode Switch, repairing damaged wiring or connectors, adjusting or replacing the shift linkage, or reprogramming or replacing the TCM.
7. Is the Internal Mode Switch the same as a neutral safety switch?
The Internal Mode Switch performs similar functions to a neutral safety switch but is more advanced, as it also communicates the gear position to the Transmission Control Module.
8. Can a dead battery cause the P1825 code on a Buick?
A dead or weak battery could potentially lead to communication errors in the transmission system, although it is not a common cause of the P1825 code.
9. How much does it cost to repair a P1825 code on a Buick?
Repair costs can range from $100 to $400 or more, depending on whether the issue is related to wiring repairs, IMS replacement, or other components.
10. Can a software update fix the P1825 code on a Buick?
In some cases, a software update for the Transmission Control Module may resolve the issue if it is caused by a programming error.
Discuss the causes and fixes for P1825 Buick OBDII Code
Code P1825 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
