AutoCodes – GMC – P1824 2014 GMC Sierra

P1824 2014 GMC Sierra Code - Internal Mode Switch 'P' Circuit Low Voltage

Quick Answer

The internal mode switch indicates the Transmission Control Module (TCM) which gear position the vehicle operator has selected. Common causes include Faulty Transmission Internal Mode Switch, Transmission Internal Mode Switch harness is open or shorted, Transmission Internal Mode Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1824 2014 GMC Sierra indicates Internal Mode Switch 'P' Circuit Low Voltage.
Common causes: Common causes include Faulty Transmission Internal Mode Switch, Transmission Internal Mode Switch harness is open or shorted, Transmission Internal Mode Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 199

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1824 2014 GMC Sierra Description

The internal mode switch indicates the Transmission Control Module (TCM) which gear position the vehicle operator has selected. The internal mode switch consists of 5 separate hall effect switches. Each hall effect switch is supplied with a 9 V reference circuit and a signal circuit from the TCM. Each signal circuit for each gear selector position will have either a voltage reading of 0.70-0.96 V indicating On or 1.68-2.38 V indicating Off. The voltage values on each internal mode switch circuit will change and are dependent on the position of the gear selector. The state of each internal mode switch A/B/C/P/S signal circuit is displayed on the scan tool. The Diagnostic Trouble Code (DTC) will be set when the TCM has detected the internal mode switch P signal circuit voltage is less than 0.7 V, for 1.75 s.

OBDII Code P1824 2014 GMC Sierra - Internal Mode Switch 'P' Circuit Low Voltage - AutoCodes.com — P1824 2014 GMC Sierra Code - Internal Mode Switch 'P' Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P1824 2014 GMC Sierra?

Faulty Transmission Internal Mode Switch
Transmission Internal Mode Switch harness is open or shorted
Transmission Internal Mode Switch circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC P1824 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1824 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1824 2014 GMC Sierra code?

Need more information on how to fix the P1824 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1824 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.