AutoCodes – Nissan – P1805 2008 Nissan Rogue

P1805 2008 Nissan Rogue Code - Stop Lamp Switch

Quick Answer

The brake switch signal is applied to the Engine Control Module (ECM) through the stop lamp switch when the brake pedal is depressed. Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1805 2008 Nissan Rogue indicates Stop Lamp Switch.
Common causes: Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,551

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 05, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1805 2008 Nissan Rogue Description

The brake switch signal is applied to the Engine Control Module (ECM) through the stop lamp switch when the brake pedal is depressed. This signal is used mainly to decrease the engine speed when the vehicle is driving. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a faulty Stop Lamp Switch.

OBDII Code P1805 2008 Nissan Rogue - Stop Lamp Switch - AutoCodes.com — P1805 2008 Nissan Rogue Code - Stop Lamp Switch

What does this mean?

What are the Possible Causes of the DTC P1805 2008 Nissan Rogue?

Faulty Stop Lamp Switch
Stop Lamp Switch harness is open or shorted
Stop Lamp Switch circuit poor electrical connection

How to Fix the DTC P1805 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1805 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1805 2008 Nissan Rogue code?

Need more information on how to fix the P1805 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1805 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1805 2008 Nissan Rogue Code

1. What does OBDII code P1805 on a 2008 Nissan Rogue indicate?

- OBDII code P1805 on a 2008 Nissan Rogue refers to an issue with the Stop Lamp Switch circuit.

2. What are the common symptoms of a P1805 code in a 2008 Nissan Rogue?

- Common symptoms include the inability to shift out of park, the brake lights staying on continuously, and the cruise control not working.

3. What are the possible causes of a P1805 code in a 2008 Nissan Rogue?

- The most common causes are a faulty stop lamp switch, a misadjusted stop lamp switch, damaged wiring or connectors in the circuit, or a failed brake light bulb.

4. How do I diagnose a P1805 code in my 2008 Nissan Rogue?

- To diagnose the issue, you can start by checking the stop lamp switch for proper operation, inspecting the wiring and connectors for any damage, and testing the brake light bulbs.

5. Can I repair a P1805 code in my 2008 Nissan Rogue myself?

- Yes, depending on the cause, you may be able to repair the issue yourself by replacing the stop lamp switch, adjusting its position, repairing damaged wiring, or replacing faulty brake light bulbs.

6. Is it safe to continue driving with a P1805 code in my 2008 Nissan Rogue?

- It is not recommended to drive with a P1805 code as it can affect the proper functioning of your brake lights and potentially lead to safety hazards on the road.

7. How much does it typically cost to repair a P1805 code in a 2008 Nissan Rogue?

- The cost of repairing a P1805 code in a 2008 Nissan Rogue can vary depending on the underlying cause, but it may range from $50 to $200 for parts and labor.

8. Will resetting the OBDII code P1805 in my 2008 Nissan Rogue make the issue go away?

- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the P1805 code is not addressed, the code is likely to reappear.

9. Can a faulty stop lamp switch cause other problems in my 2008 Nissan Rogue?

- Yes, a faulty stop lamp switch can lead to other issues such as brake lights not functioning properly, difficulty shifting gears, and the cruise control not working.

10. How can I prevent a P1805 code from recurring in my 2008 Nissan Rogue?

- To prevent the P1805 code from recurring, it's essential to ensure that the stop lamp switch is properly adjusted, the wiring and connectors are in good condition, and the brake light bulbs are functioning correctly. Regular maintenance checks can help prevent future issues.