P1801 2008 Nissan Altima Sedan Code - Variable Intake Air System Control Solenoid Valve 2
Quick Answer
When the engine is running at low or medium speed, the power valve is fully closed. Common causes include Faulty VIAS control solenoid valve 2, VIAS control solenoid valve circuit harness is open or shorted, VIAS control solenoid valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1801 2008 Nissan Altima Sedan indicates Variable Intake Air System Control Solenoid Valve 2.
- Common causes
- Common causes include Faulty VIAS control solenoid valve 2, VIAS control solenoid valve circuit harness is open or shorted, VIAS control solenoid valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1801 2008 Nissan Altima Sedan Description
The surge tank and one-way valve are provided. When the engine is running at high speed, the Engine Control Module (ECM) sends the signal to the Variable Intake Air System (VIAS) control solenoid valve. This signal introduces the intake manifold vacuum into the power valve actuator and therefore opens the power valve to two suction passages together in the collector.
Under this condition, the effective port length is equivalent to the length of the suction port provided independently for each cylinder. This shortened port length results in enhanced engine output with reduced suction resistance under high speeds.
What are the Possible Causes of the DTC P1801 2008 Nissan Altima Sedan?
- Faulty VIAS control solenoid valve 2
- VIAS control solenoid valve circuit harness is open or shorted
- VIAS control solenoid valve circuit poor electrical connection
How to Fix the DTC P1801 2008 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1801 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1801 2008 Nissan Altima Sedan code?
Need more information on how to fix the P1801 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1801 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1801 2008 Nissan Altima Sedan Code
1. What does the OBDII code P1801 mean on a 2008 Nissan Altima Sedan?
P1801 indicates an issue with the Variable Intake Air System (VIAS) Control Solenoid Valve 2, which helps manage engine airflow for optimal performance.
2. What are the common symptoms of the P1801 code in a 2008 Nissan Altima?
Symptoms may include reduced engine performance, poor acceleration, rough idling, and an illuminated Check Engine Light.
3. What causes the P1801 code to appear in a 2008 Nissan Altima?
Possible causes include a faulty VIAS control solenoid valve, damaged wiring or connectors, a vacuum leak, or an issue with the engine control module (ECM).
4. Can I drive my 2008 Nissan Altima with the P1801 code?
While the vehicle may still be drivable, driving with this code could lead to reduced performance and potentially damage the engine over time if not addressed.
5. How do I diagnose the P1801 code on my Nissan Altima?
Diagnosis typically involves checking the VIAS control solenoid valve for proper operation, inspecting the wiring and connectors for damage, and verifying there are no vacuum leaks.
6. What repairs are needed to fix the P1801 code?
Repairs may include replacing the VIAS control solenoid valve, repairing or replacing damaged wiring, fixing vacuum leaks, or reprogramming the ECM if necessary.
7. How much does it cost to repair the P1801 code on a 2008 Nissan Altima?
Repair costs can vary, but replacing the VIAS control solenoid valve typically ranges between $150 and $300, including parts and labor.
8. How can I prevent the P1801 code from recurring?
Regular maintenance, such as inspecting vacuum lines and keeping electrical connections clean, can help prevent issues with the VIAS system.
9. Does a faulty VIAS control solenoid valve affect fuel efficiency?
Yes, a faulty VIAS control solenoid valve can negatively impact fuel efficiency by disrupting optimal air intake management.
10. Can a dirty air filter trigger the P1801 code?
While a dirty air filter is unlikely to directly trigger P1801, it can contribute to airflow issues that may exacerbate VIAS system problems.
Discuss the causes and fixes for P1801 2008 Nissan Altima Sedan OBDII Code
Code P1801 2008 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
