AutoCodes – Generic – P17EE

P17EE Code - Ratio Monitoring Shift 3-2

Quick Answer

The Transmission Control Module (TCM) monitors the Shift Ratio. Common causes include Transmission Mechanical Problems, Faulty Transmission Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P17EE indicates Ratio Monitoring Shift 3-2.
Common causes
Common causes include Transmission Mechanical Problems, Faulty Transmission Assembly.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,998
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 19, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P17EE Description

The Transmission Control Module (TCM) monitors the Shift Ratio. The TCM sets the OBDII code when the Shift Ratio is not to factory specifications.
OBDII Code P17EE - Ratio Monitoring Shift 3-2 - AutoCodes.com
P17EE Code - Ratio Monitoring Shift 3-2

What are the Possible Causes of the DTC P17EE?

  • Transmission Mechanical Problems
  • Faulty Transmission Assembly

How to Fix the DTC P17EE?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P17EE code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P17EE code?

Need more information on how to fix the P17EE code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P17EE code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P17EE Code

1. What does the OBDII code P17EE mean?

P17EE indicates an issue with the drivetrain, specifically a "Ratio Monitoring Shift 3-2" fault, meaning the transmission is not achieving the expected gear ratio during a 3rd to 2nd gear shift.

2. What are the common symptoms of a P17EE code?

Symptoms include rough or delayed shifting between gears, slipping during the 3-2 downshift, decreased fuel efficiency, or the transmission going into limp mode.

3. What causes the P17EE code to appear?

Common causes include low or contaminated transmission fluid, a malfunctioning transmission solenoid, worn clutch packs, or internal mechanical damage in the transmission.

4. Can a P17EE code be caused by low transmission fluid?

Yes, insufficient or degraded transmission fluid can lead to improper gear ratio monitoring and trigger the P17EE code.

5. How can I diagnose a P17EE code?

Start by checking the transmission fluid level and condition. Then use a diagnostic scanner to verify the code and monitor shift patterns. Inspect the transmission solenoids and internal components if necessary.

6. Is it safe to drive with a P17EE code?

Driving with a P17EE code is not recommended as it may cause further damage to the transmission and lead to more expensive repairs.

7. What repairs are needed to fix a P17EE code?

Repairs may involve replacing or cleaning the transmission solenoids, flushing or refilling the transmission fluid, or addressing internal transmission damage such as worn clutch packs.

8. Can a software update fix the P17EE code?

In some cases, a software update for the transmission control module (TCM) can resolve ratio monitoring issues if the problem is related to incorrect shift logic or calibration.

9. How much does it cost to repair a P17EE code?

Repair costs vary, ranging from $100 for a transmission fluid flush to $2,000 or more for internal transmission repairs or a rebuild.

10. Can ignoring the P17EE code lead to further damage?

Yes, ignoring the P17EE code can result in more severe transmission damage, higher repair costs, and potential vehicle safety issues.

Discuss the causes and fixes for P17EE OBDII Code

Code P17EE comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play