P17DE 2018 GMC Sierra Code - Transmission Range Control Module System Voltage Performance
Quick Answer
The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Faulty Transmission Range Control Module, Transmission Range Control Module harness is open or shorted, Transmission Range Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P17DE 2018 GMC Sierra indicates Transmission Range Control Module System Voltage Performance.
- Common causes
- Common causes include Faulty Transmission Range Control Module, Transmission Range Control Module harness is open or shorted, Transmission Range Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P17DE 2018 GMC Sierra Description
What are the Possible Causes of the DTC P17DE 2018 GMC Sierra?
- Faulty Transmission Range Control Module
- Transmission Range Control Module harness is open or shorted
- Transmission Range Control Module circuit poor electrical connection
How to Fix the DTC P17DE 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P17DE 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P17DE 2018 GMC Sierra code?
Need more information on how to fix the P17DE 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P17DE 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P17DE 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P17DE in a 2018 GMC Sierra?
The common symptoms may include rough shifting, transmission slipping, poor fuel economy, and the transmission may go into limp mode.
2. What does the OBDII code P17DE indicate in a 2018 GMC Sierra?
OBDII code P17DE indicates an issue with the Transmission Range Control Module System Voltage Performance in a 2018 GMC Sierra.
3. What are the possible causes of OBDII code P17DE in a 2018 GMC Sierra?
Possible causes include a faulty transmission range control module, wiring issues, a weak battery, or a failing alternator.
4. How can I diagnose the OBDII code P17DE in my 2018 GMC Sierra?
Diagnosis involves using an OBDII scanner to retrieve the code, checking the transmission range control module for any visible damage, and inspecting the wiring for any shorts or breaks.
5. Can I continue driving my 2018 GMC Sierra with OBDII code P17DE?
It is not recommended to drive your vehicle with this code as it may lead to further transmission issues and potential safety hazards.
6. How can I repair OBDII code P17DE in my 2018 GMC Sierra?
Repair may involve replacing the transmission range control module, repairing any damaged wiring, ensuring a strong battery connection, and checking the alternator's performance.
7. Is it safe to clear the OBDII code P17DE in my 2018 GMC Sierra with a scanner?
Clearing the code temporarily may turn off the warning light, but it is crucial to address the underlying issue to prevent further damage to the transmission system.
8. Can a DIY enthusiast fix OBDII code P17DE in a 2018 GMC Sierra?
While some basic troubleshooting steps can be done by a DIY enthusiast, diagnosing and repairing complex transmission issues may require professional expertise.
9. How much does it cost to repair OBDII code P17DE in a 2018 GMC Sierra?
The cost of repair can vary depending on the specific issue causing the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. How often does OBDII code P17DE occur in a 2018 GMC Sierra?
The occurrence of this specific code can vary, but it is essential to address it promptly to prevent further damage to the transmission system.
Discuss the causes and fixes for P17DE 2018 GMC Sierra OBDII Code
Code P17DE 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
