P1772 Hyundai Code - Selection Position
Quick Answer
P1772 Hyundai indicates Selection Position. Common causes for P1772 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1772 Hyundai indicates Selection Position.
- Common causes
- Common causes for P1772 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1772 Hyundai Description
How to Fix the DTC P1772 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1772 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1772 Hyundai code?
Need more information on how to fix the P1772 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1772 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1772 Hyundai Code
1. What does the OBDII code P1772 mean on a Hyundai?
P1772 indicates an issue with the transmission range switch, often related to the selection position input not being correctly recognized by the vehicle's computer.
2. What are the common symptoms of code P1772 in a Hyundai?
Symptoms may include the vehicle being stuck in one gear, hesitation during shifting, the transmission going into limp mode, or an illuminated check engine light.
3. What causes the P1772 code to appear in a Hyundai?
Common causes include a faulty transmission range switch, damaged wiring or connectors, or issues with the vehicle's shift linkage.
4. Can driving with a P1772 code cause further damage to my Hyundai?
Yes, driving with this code can lead to transmission damage or unsafe driving conditions if the vehicle becomes stuck in an incorrect gear.
5. How do I diagnose the P1772 code on my Hyundai?
Diagnosis typically involves using an OBDII scanner, inspecting the transmission range switch, checking the wiring and connectors, and testing the shift linkage.
6. How is the P1772 code fixed in a Hyundai?
Repairs may involve replacing the transmission range switch, repairing or replacing damaged wiring, or adjusting the shift linkage.
7. How much does it cost to repair code P1772 on a Hyundai?
Repair costs can vary but typically range from $150 to $400, depending on whether the issue is with the switch, wiring, or linkage.
8. Can I reset the P1772 code without fixing the problem?
While you can clear the code with an OBDII scanner, the issue will likely return if the underlying problem is not fixed.
9. Is the transmission range switch in a Hyundai easy to replace?
Replacing the transmission range switch can be straightforward for those experienced with car repairs, but professional help may be needed for proper diagnosis and installation.
10. What tools are needed to diagnose and repair the P1772 code on a Hyundai?
You’ll typically need an OBDII scanner, basic hand tools, a multimeter for electrical testing, and possibly a repair manual specific to your Hyundai model.
Discuss the causes and fixes for P1772 Hyundai OBDII Code
Code P1772 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
