P176D 2014 GMC Sierra Code - Intermediate Speed Sensor Circuit High Voltage
Quick Answer
The sensor contains a hall-effect sensor and additional electronics that process the signal. Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P176D 2014 GMC Sierra indicates Intermediate Speed Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P176D 2014 GMC Sierra Description
The sensor is an input to the control module. The input signal is used to determine the rotational speed of the component, the Diagnostic Trouble Code (DTC) will be set when the reaction Carrier Assembly Transmission Intermediate Speed Sensor is less than 4.75 V for greater than 1 s.
What are the Possible Causes of the DTC P176D 2014 GMC Sierra?
- Faulty Transmission Intermediate Shaft Speed Sensor
- Transmission Intermediate Shaft Speed Sensor harness is open or shorted
- Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection
- Faulty Transmission Control Module
How to Fix the DTC P176D 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P176D 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P176D 2014 GMC Sierra code?
Need more information on how to fix the P176D 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P176D 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P176D 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P176D in a 2014 GMC Sierra?
- Common symptoms include erratic shifting, harsh shifting, transmission slipping, and illuminated Check Engine light.
2. What does the OBDII code P176D for Intermediate Speed Sensor Circuit High Voltage indicate in a 2014 GMC Sierra?
- This code indicates that the transmission control module has detected a high voltage condition in the intermediate speed sensor circuit.
3. What are the possible causes of OBDII code P176D in a 2014 GMC Sierra?
- Possible causes include a faulty intermediate speed sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning transmission control module.
4. How can I diagnose the cause of OBDII code P176D in my 2014 GMC Sierra?
- To diagnose the issue, you can perform a visual inspection of the sensor and its wiring, test the sensor's resistance, and use a scan tool to monitor sensor data and transmission operation.
5. Can I continue driving my 2014 GMC Sierra with OBDII code P176D present?
- It is not recommended to continue driving with this code active, as it can lead to further transmission damage and potential safety hazards.
6. How can I repair OBDII code P176D in my 2014 GMC Sierra?
- Repair options include replacing the intermediate speed sensor, repairing any damaged wiring or connectors, and resetting the fault code with a scan tool after completing the repairs.
7. Is it possible to reset OBDII code P176D in a 2014 GMC Sierra without fixing the underlying issue?
- While you can clear the code with a scan tool, it is not advisable as the issue causing the code will likely persist and may lead to further problems down the line.
8. How much does it typically cost to repair OBDII code P176D in a 2014 GMC Sierra?
- The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P176D in a 2014 GMC Sierra?
- Depending on your skill level and access to tools, it is possible to address this code yourself by following repair guides and being cautious when working on the transmission system.
10. Will OBDII code P176D cause any long-term damage to my 2014 GMC Sierra if left unresolved?
- Ignoring this code can lead to transmission issues, reduced fuel efficiency, and potentially more costly repairs in the future, so it is best to address it promptly.
Discuss the causes and fixes for P176D 2014 GMC Sierra OBDII Code
Code P176D 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
