P176C 2015 Chevrolet Silverado Code - Intermediate Speed Sensor Circuit Low Voltage
Quick Answer
The sensor contains a hall-effect sensor and additional electronics that process the signal. Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P176C 2015 Chevrolet Silverado indicates Intermediate Speed Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P176C 2015 Chevrolet Silverado Description
The sensor is an input to the control module. The input signal is used to determine the rotational speed of the component, the Diagnostic Trouble Code (DTC) will be set when the reaction Carrier Assembly Transmission Intermediate Speed Sensor is less than 0.25 V for greater than 1 s.
What are the Possible Causes of the DTC P176C 2015 Chevrolet Silverado?
- Faulty Transmission Intermediate Shaft Speed Sensor
- Transmission Intermediate Shaft Speed Sensor harness is open or shorted
- Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection
- Faulty Transmission Control Module
How to Fix the DTC P176C 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P176C 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P176C 2015 Chevrolet Silverado code?
Need more information on how to fix the P176C 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P176C 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P176C 2015 Chevrolet Silverado Code
What does the OBDII code P176C mean for a 2015 Chevrolet Silverado?
P176C indicates a low voltage issue in the intermediate speed sensor circuit, which is part of the transmission system responsible for monitoring shaft speeds.
What are the symptoms of P176C in a 2015 Chevrolet Silverado?
Common symptoms include erratic shifting, transmission slipping, reduced fuel efficiency, and activation of the check engine light.
What causes the P176C code to appear in my Silverado?
The code can be triggered by a faulty intermediate speed sensor, damaged wiring or connectors, low transmission fluid, or a malfunctioning transmission control module (TCM).
Can I drive my 2015 Chevrolet Silverado with the P176C code?
Driving with this code is not recommended, as it can lead to poor transmission performance and potential long-term damage to the drivetrain.
How can I diagnose the P176C code on my Silverado?
Use an OBDII scanner to confirm the code, then inspect the wiring, connectors, and intermediate speed sensor for damage or corrosion. Check the transmission fluid level as well.
What is the intermediate speed sensor, and what does it do?
The intermediate speed sensor monitors the rotational speed of a transmission component and sends data to the TCM to ensure proper gear shifting.
How do I fix the P176C code on a 2015 Chevrolet Silverado?
Repairs may include replacing the intermediate speed sensor, repairing damaged wiring or connectors, topping off or replacing transmission fluid, or reprogramming the TCM.
How much does it cost to fix the P176C code?
Repair costs vary but typically range from $150 to $300 for sensor replacement, excluding additional charges for wiring repairs or fluid changes.
Can low transmission fluid cause the P176C code?
Yes, low or degraded transmission fluid can disrupt sensor function and trigger the P176C code.
Does the P176C code require reprogramming the TCM?
Reprogramming the TCM may be necessary if sensor replacement and wiring repairs do not resolve the issue. Always follow manufacturer guidelines.
Discuss the causes and fixes for P176C 2015 Chevrolet Silverado OBDII Code
Code P176C 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
