P176C 2014 GMC Sierra Code - Intermediate Speed Sensor Circuit Low Voltage
Quick Answer
The sensor contains a hall-effect sensor and additional electronics that process the signal. Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P176C 2014 GMC Sierra indicates Intermediate Speed Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P176C 2014 GMC Sierra Description
The sensor is an input to the control module. The input signal is used to determine the rotational speed of the component, the Diagnostic Trouble Code (DTC) will be set when the reaction Carrier Assembly Transmission Intermediate Speed Sensor is less than 0.25 V for greater than 1 s.
What are the Possible Causes of the DTC P176C 2014 GMC Sierra?
- Faulty Transmission Intermediate Shaft Speed Sensor
- Transmission Intermediate Shaft Speed Sensor harness is open or shorted
- Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection
- Faulty Transmission Control Module
How to Fix the DTC P176C 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P176C 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P176C 2014 GMC Sierra code?
Need more information on how to fix the P176C 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P176C 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P176C 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P176C in a 2014 GMC Sierra?
The common symptoms of OBDII code P176C (Intermediate Speed Sensor Circuit Low Voltage) in a 2014 GMC Sierra may include issues with shifting gears, harsh shifting, and even the transmission not shifting at all.
2. What are the possible causes of OBDII code P176C in a 2014 GMC Sierra?
Potential causes of OBDII code P176C in a 2014 GMC Sierra include a faulty intermediate speed sensor, damaged wiring or connectors in the sensor circuit, low transmission fluid level, or internal transmission issues.
3. How can I diagnose the OBDII code P176C in my 2014 GMC Sierra?
To diagnose OBDII code P176C in a 2014 GMC Sierra, you can use a diagnostic scanner to retrieve the trouble code and then inspect the intermediate speed sensor, check the wiring and connectors for any damage, and ensure the transmission fluid level is adequate.
4. Can I continue driving my 2014 GMC Sierra with OBDII code P176C?
It is not recommended to drive your 2014 GMC Sierra with OBDII code P176C (Intermediate Speed Sensor Circuit Low Voltage) as it can lead to further transmission issues and potential safety hazards. It's advisable to address the problem promptly.
5. How can I repair OBDII code P176C in my 2014 GMC Sierra?
Repairing OBDII code P176C in a 2014 GMC Sierra typically involves replacing the faulty intermediate speed sensor, repairing or replacing damaged wiring or connectors, ensuring the transmission fluid level is correct, and addressing any internal transmission problems.
6. Is it possible to reset OBDII code P176C in a 2014 GMC Sierra without fixing the underlying issue?
Resetting OBDII code P176C in a 2014 GMC Sierra without fixing the underlying issue will only temporarily clear the code. The problem will likely reoccur until the root cause is identified and repaired.
7. Will OBDII code P176C cause my 2014 GMC Sierra to go into limp mode?
In some cases, OBDII code P176C (Intermediate Speed Sensor Circuit Low Voltage) can trigger the transmission control module to put your 2014 GMC Sierra into limp mode to prevent further damage. This mode limits the vehicle's performance and speed.
8. How much does it cost to repair OBDII code P176C in a 2014 GMC Sierra?
The cost to repair OBDII code P176C in a 2014 GMC Sierra can vary depending on the underlying issue, labor rates, and the cost of parts. It's recommended to consult with a mechanic or dealership for an accurate estimate.
9. Can a DIY enthusiast fix OBDII code P176C in a 2014 GMC Sierra?
While some DIY enthusiasts may have the skills to address OBDII code P176C in a 2014 GMC Sierra, it's a complex issue related to the transmission system. It's advisable to consult a professional mechanic for proper diagnosis and repair.
10. How long does it typically take to repair OBDII code P176C in a 2014 GMC Sierra?
The time to repair OBDII code P176C in a 2014 GMC Sierra can vary based on the specific issue causing the code. It may take a few hours to a full day for diagnosis, parts replacement, and testing.
Discuss the causes and fixes for P176C 2014 GMC Sierra OBDII Code
Code P176C 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
